BS standards cable - Caledonian Cables

BS cable standard code Name BIP 0007-2004 Telecommunication cabling and equipment installations - A Guide to requirements and responsibilities BS 1858-2002 Electric cables - Accessories - Bitumen-based filling compounds BS 196-1961 Specification for protected-type non-reversible plugs, socket-outlets cable-couplers and appliance-couplers with earthing contacts for single phase a.c. circuits up to 250 volts BS 2316 Pts.1 & 2-1968 Specification for radio-frequency cables. General requirements and tests. British Government Services requirements BS 2484-1985 Specification for straight concrete and clayware cable covers BS 2562-1979 Specification for cable boxes for transformers and reactors BS 2E 21-1957 Pren type electric cables for aircraft BS 2G 180-1974 Specification for permanent splicing of aircraft electrical cables BS 2G 215-1-1985 Nickel-chromium and nickel-aluminium thermocouple extension cables for aircraft - Specification for conductors BS 2G 215-2-1989 Nickel-chromium and nickel-aluminium thermocouple extension cables for aircraft - Specification for terminations BS 2G 221-1980 Specification for Minyvin type electric cables (metric units) BS 2G 223-1989 Specification for screen terminating devices for aircraft electric cables BS 2G 232-1987 Specification for electric cables for general airframe or equipment interconnect use (135 °C), wrapped insulation BS 2G 238-1996 Specification for electric cables for general airframe or equipment interconnect use (260 °C), nickel plated copper and copper alloy conductors, with wrapped insulation BS 3454-1995 Specification for 1.9/3.3 kV, 300 A bolted flameproof cable couplers and adaptors (including 380/660 V and 640/1100 V, 300 A adaptors) for use in coal mines BS 3858-1992 Specification for binding and identification sleeves for use on electric cables and wires BS 3905-1995 Specification for 3.8/6.6 kV, 300 A bolted flameproof cable couplers and adaptors, for use in coal mines BS 3988-1970 Specification for wrought aluminium for electrical purposes - Solid conductors for insulated cables BS 3G 197-1982 Specification for stud-type terminal blocks for terminations on aircraft electric cables BS 3G 198-2-1997 Sleeves for aircraft electric cables and equipment wires - Specification for slip-on sleeves for identification purposes BS 3G 198-4-1996 Sleeves for aircraft electric cables and equipment wires - Specification for fluoropolymer heat shrinkable sleeving for binding and insulation BS 3G 210-1996 Specification for PTFE insulated equipment wires and cables, single- and multi-core, with silver plated copper conductors (190 °C) or nickel plated copper conductors (260 °C) BS 3G 231-1997 Specification for conductors for general-purpose aircraft electrical cables and aerospace applications BS 3G 233-1990 Specification for electric cables for general airframe or equipment interconnect use (135 °C), extruded insulation BS 4553-1-1998 Specification for 600/1000 V single-phase split concentric electric cables - Cables having PVC insulation BS 4553-2-1998 Specification for 600/1000 V single-phase split concentric electric cables - Cables having thermosetting insulation BS 4553-3-1998 Specification for 600/1000 V single-phase split concentric electric cables - Cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire BS 4579-2-1973 Specification for performance of mechanical and compression joints in electric cable and wire connectors - Compression joints in nickel, iron and plated copper conductors BS 4678-1-1971 Cable trunking - Steel surface trunking BS 4678-2-1973 Cable trunking - Steel underfloor (duct) trunking BS 4678-4-1982 Cable trunking - Specification for cable trunking made of insulating material BS 4727 Pt.2 Group 08-1986 Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering. Electric cable terminology BS 4727-2 Group 08-1994 Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms - Terms particular to power engineering - Electric cables BS 4737-3.30-1986 Intruder alarm systems - Specifications for components - Specification for PVC insulated cables for interconnecting wiring BS 4808-1-1972 Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - General requirements and tests BS 4808-2-1972 Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - Equipment wires with solid or stranded conductors, unscreened, single BS 4808-3-1972 Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - Cables and equipment wires, with solid or stranded conductors, screened, single BS 4808-4-1974 Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - Equipment wires with solid or stranded conductors, unscreened, in pairs, triples, quads and quintuples BS 4808-5-1973 Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - Cables with solid or stranded conductors, screened and sheathed, one pair BS 4937-30-1993 International thermocouple reference tables - Extension and compensating cables - Tolerances and identification system BS 4G 178-2-1986 Crimped joints for aircraft electrical cables and wires - Specification for control of crimping (including user control tests) BS 4G 198-1-1997 Sleeves for aircraft electric cables and equipment wires - Specification for elastomeric sleeves for binding and identification BS 4G 198-3-1999 Sleeves and moulded components for aircraft electric cables and equipment wires - Specification for heat-shrinkable sleeving for binding, insulation, and identification BS 5099-2004 Electric cables - Voltage levels for spark testing BS 5308-1-1986 Instrumentation cables - Specification for polyethylene insulated cables BS 5308-2-1986 Instrumentation cables - Specification for PVC insulated cables BS 5372-1997 Specification for dimensions of cable terminations for multi-core extruded solid dielectric insulated distribution cables of rated voltages 600/1000 V and 1900/3300 V having copper or aluminium conductors BS 542-1973 Specification for cable glands and sealing boxes for association with apparatus for use at mines and quarries BS 5G 178-1-1993 Crimped joints for aircraft electrical cables and wires - Specification for design requirements (including tests) for components and tools BS 6004-2000 Electric cables - PVC insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring BS 6007-2000 Electric cables - Single core unsheathed heat resisting cables for voltages up to and including 450/750 V, for internal wiring BS 6007-2006 Electric cables - Single core unsheathed heat resisting cables forvoltages up to and including 450/750 V, for internal wiring BS 6121-1-2005 Mechanical cable glands - Armour glands - Requirements and test methods BS 6121-5-2005 Mechanical cable glands - Code of practice for selection, installation and inspection of cable glands and armour glands BS 6207-3-2001 Mineral insulated cables with a rated voltage not exceeding 750 V. Guide to use BS 6234-1987 Specification for polyethylene insulation and sheath of electric cables BS 638-4-1996 Arc welding power sources, equipment and accessories - Specification for welding cables BS 6387-1994 Specification for performance requirements for cables required to maintain circuit integrity under fire conditions BS 6435-1984 Specification for unfilled enclosures for the dry termination of HV cables for transformers and reactors BS 6436-1984 Specification for ground mounted distribution transformers for cable box or unit substation connection BS 6469-99.1-1992 Insulating and sheathing materials of electric cables - Test methods used in the United Kingdom but not specified in BS EN 60811: Non-electrical tests BS 6469-99.2-1992 Insulating and sheathing materials of electric cables - Test methods used in the United Kingdom but not specified in BS EN 60811 or other Parts of BS 6469: Electrical tests BS 6480-1988 Specification for impregnated paper-insulated lead or lead alloy sheathed electric cables of rated voltages up to and including 33000 V BS 6500-2000 Electric cables - Flexible cords rated up to 300/500 V, for use with appliances and equipment intended for domestic, office and similar environments BS 6513-1-1984 Wideband cabled distribution systems - Glossary of terms BS 6513-2-1984 Wideband cabled distribution systems - Methods of measurement BS 6513-4-1984 Wideband cabled distribution systems - Specification for performance requirements, for upstream television BS 6513-5-1987 Wideband cabled distribution systems - Recommendations for one-way and interactive data services BS 6622-1999 Specification for cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV up to 19/33 kV BS 6701-2004 Telecommunications equipment and telecommunications cabling - Specification for installation, operation and maintenance BS 6708-1998 Flexible cables for use at mines and quarries BS 6724-1997 Electric cables - Thermosetting insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V, having low emission of smoke and corrosive gases when affected by fire BS 6883-1999 Elastomer insulated cables for fixed wiring in ships and on mobile and fixed offshore units - Requirements and test methods BS 6904-1987 Guide for cable connections for gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above BS 6910-1-1988 Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. Specification for materials BS 6910-2-1989 Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. Code of practice for on-site installation BS 6913-6-1991 Operation and maintenance of earth-moving machinery - Specification for identification and marking of electrical wires and cables BS 6946-1988 Specification for metal channel cable support systems for electrical installations BS 7019-1989 Specification for fully screened 400 A bolted flameproof cable couplers and adaptors for use on systems up to and including 6.6 kV, primarily for use in mines BS 7197-1990 Specification for performance of bonds for electric power cable terminations and joints for system voltages up to 36 kV BS 7211-1998 Electric cables - Thermosetting insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring, and having low emission of smoke and corrosive gases when affected by fire BS 7215-1990 Specification for separable insulated cable connector systems above 1 kV and up to 36 kV BS 7346-6-2005 Components for smoke and heat control systems - Specifications for cable systems BS 7383-1990 Specification for cold-pour resin-based compound for use as a filling medium in terminating cables in enclosures for voltages not exceeding 11 kV for use in coal mines BS 7450-1991 Method for determination of economic optimization of power cable size BS 7540-2-2005 Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V. Harmonized cable types from HD 21 and HD 22 BS 7540-3-2005 Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V. National standard cables not included in HD 21 and HD 22 BS 7609-1992 Code of practice for installation and inspection of uninsulated compression and mechanical connectors for power cables with copper or aluminium conductors BS 7629-1-1997 Specification for 300/500 V fire resistant electric cables having low emission of smoke and corrosive gases when affected by fire - Multicore cables BS 7629-2-1997 Specification for 300/500 V fire resistant electric cables having low emission of smoke and corrosive gases when affected by fire - Multipair cables BS 7655-1.2-1997 Specification for insulating and sheathing materials for cables - Part 1. Cross-linked elastomeric insulating compounds - Section 1.2 General 90 °C application BS 7655-1.3-2000 Specification for insulating and sheathing materials for cables - Elastomeric insulating compounds - XLPE - Sec1.3 XLPE BS 7655-1.4-2000 Specification for insulating and sheathing materials for cables - Elastomeric insulating compounds - Oil resisting types - Oil resisting types BS 7655-1.5-2000 Specification for insulating and sheathing materials for cables - Part 1: Cross-linked elastomeric insulating compounds - Section 1.5: Flame retardant composites BS 7655-10.1-2000 Specification for insulating and sheathing materials for cables - Part 10: Polyethylene sheathing compounds - Section 10.1: Thermoplastic medium density polyethylene (MDPE) sheathing compound BS 7655-2.3-2000 Specification for insulating and sheathing materials for cables - Elastomeric sheathing compounds - General application - General application BS 7655-2.4-2000 Specification for insulating and sheathing materials for cables - Part 2: Cross-linked elastomeric sheathing compounds - Section 2.4: Welding cable covering BS 7655-2.6-2000 Specification for insulating and sheathing materials for cables - Part 2: Cross-linked elastomeric sheathing compounds - Section 2.6: Sheathing compounds for ships' wiring and offshore applications BS 7655-3.2-2000 Specification for insulating and sheathing materials for cables - PVC insulating compounds - Hard grade types - Hard grade types BS 7655-4.2-2000 Specification for insulating and sheathing materials for cables - PVC sheathing compounds - General application - General application BS 7727-1994 Code of practice for installation and inspection of pre-insulated compression terminals and connectors for cables with copper conductors up to 6 mm2 BS 7769-1.1-1997 Electric cables - Calculation of the current rating - Current rating equations (100% load factor) and calculation of losses - General BS 7769-1.2-1994 Electric cables - Calculation of the current rating - Current rating equations (100% load factor) and calculation of losses - Sheath eddy current loss factors for two circuits in flat formation BS 7769-2-2.1-1997 Electric cables - Calculation of the current rating - Thermal resistance - Calculation of thermal resistance - Section 2.1: Calculation of thermal resistance BS 7769-2.1-1997 Electric cables - Calculation of the current rating - Thermal resistance - Calculation of thermal resistance BS 7769-2.2-1997 Electric cables - Calculation of the current rating - Thermal resistance - A method for calculating reduction factors for groups of cables in free air, protected from solar radiation BS 7769-3.1-1997 Electric cables - Calculation of the current rating - Sections on operating conditions - Reference operating conditions and selection of cable type BS 7816-3-1998 Determination of long-term radiation ageing in polymers - Procedures for in-service monitoring of low-voltage cable materials BS 7821-2.1-1995 Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Distribution transformers with cable boxes on the high voltage and/or low voltage side - General requirements BS 7821-2.2-1998 Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Distribution transformers with cable boxes on the high voltage and/or low voltage side - Cable boxes of type 1 for use on distribution transformers meeting the requirements of BS 7821-2.1 BS 7821-2.3-1998 Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Distribution transformers with cable boxes on the high voltage and/or low voltage side - Cable boxes type 2 for use on distribution transformers meeting the requirements of BS 7821-2.1 BS 7835-2000 Specification for armoured cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV up to 19/33 kV having low emission of smoke and corrosive gases when affected by fire BS 7846-2000 Electric cables - 600/1000 V armoured fire-resistant cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire BS 7861-2-1997 Strata reinforcement support system components used in coal mines - Specification for birdcaged cablebolting BS 787-1-1969 Specification for mining type flameproof gate-end boxes - Gate-end boxes for direct-on-line motor starting (for use on 3-phase a.c. circuits up to 650 V) BS 787-2-1968 Specification for mining type flameproof gate-end boxes - Gate-end boxes with air-break circuit-breakers (for use on 3-phase a.c. circuits up to 650 volts) BS 787-3-1971 Specification for mining type flameproof gate-end boxes - Gate-end boxes with lighting transformers BS 787-4-1972 Specification for mining type flameproof gate-end boxes - Gate-end boxes for drilling machines (for use on 3-phase a.c. circuits up to 650 V) BS 7870-1-1996 LV and MV polymeric insulated cables for use by distribution and generation utilities - General BS 7870-2-1999 LV and MV polymeric insulated cables for use by distribution and generation utilities - Methods of test BS 7870-3.10-2001 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - PVC insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors BS 7870-3.11-2001 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors BS 7870-3.12-2001 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors, having low emission of smoke and corrosive gases when affected by fire BS 7870-3.20-2001 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - PVC insulated split concentric cables with copper or aluminium conductors BS 7870-3.21-2001 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated split concentric cables with copper or aluminium conductors BS 7870-3.40-2001 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated, copper wire waveform concentric cables with solid aluminium conductors BS 7870-3.50-2005 LV and MV polymeric insulated cables for use by distribution and generation utilities - Part 3: Specification for distribution cables of rated voltage 0.6/1 kV - Section 3050: XLPE insulated, copper wire waveform or helical concentric cables with solid aluminium conductors, having low emission of smoke and corrosive gases when affected by fire (Implementation of HD 603) BS 7870-4.10-1999 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kV - Single-core 11 kV and 33 kV cables - Single core 11 kV and 33 kV cables BS 7870-4.11-1999 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kV - Single-core 33 kV lead sheathed cables - Single core 33 kV lead sheathed cables BS 7870-4.20-1999 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kV - Three-core 11 kV cables - Three core 11 kV cables BS 7870-5-1999 LV and MV polymeric insulated cables for use by distribution and generation utilities - Polymeric insulated aerial bundled conductors (ABC) of rated voltage 0.6/1 kV for overhead distribution BS 7870-6.1-1999 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations - PVC insulated and PVC sheathed cables BS 7870-6.2-1999 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations - XLPE or HEPR insulated and PVC sheathed cables BS 7870-6.3-1999 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations - Cables with thermosetting insulation and non-halogenated sheath BS 7870-7.1-2003 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for power cables having rated voltages of 3.8/6.6 kV and 6.35/11 kV with special fire performance for use in power stations - Single core and 3-core cables with halogenated materials and with aluminium or steel wire armouring BS 7870-7.2-2003 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for power cables having rated voltages of 3.8/6.6 kV and 6.35/11 kV with special fire performance for use in power stations - Single-core and 3-core cables with halogen-free materials and with aluminium or steel wire armouring BS 7870-8.1-2003 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire armoured and PVC sheathed multicore cable with copper conductors - Section 8.1 Single wire armoured and PVC sheathed multicore cable with copper conductors BS 7870-8.2-2003 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire armoured and PVC sheathed multipair cable with copper conductors - Section 8.2 Single wire armoured and PVC sheathed multipair cable with copper conductors BS 7870-8.3-2003 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire armoured and PVC sheathed multicore cable with copper conductors, having reduced fire propagation performance - Section 8.3 Single wire armoured and PVC sheathed multicore cable with copper conductors, having reduced fire propagation performance BS 7870-8.4-2003 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire or double steel tape armoured and PVC sheathed multipair cable with copper conductors, having reduced fire propagation performance - Section 8.4 Single wire or double steel tape armoured and PVC sheathed multipair cable with copper conductors, having reduced fire propagation performance BS 7870-8.5-2003 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire armoured and unarmoured multicore cables with copper conductors and non-halogenated sheath - Section 8.5 Single wire armoured and unarmoured multicore cables with copper conductors and non-halogenated sheath BS 7870-8.6-2003 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire or double steel tape armoured and non-halogenated sheathed multipair cable with copper conductors - Section 8.6 Single wire or double steel tape armoured and non-halogenated sheathed multipair cable with copper conductors BS 7888-4.1-2006 Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2)kV up to 20,8/36(42)kV - Part 1: Cables with extruded insulation BS 7888-4.2-2006 Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42)kV - Part 2: Cables with impregnated paper insulation BS 7889-1997 Electric cables - Thermosetting insulated, unarmoured cables for a voltage of 600/1000 V BS 7894-2003 MV impregnated paper insulated distribution cables of rated voltages of 3.8/6.6 kV to 19/33 kV BS 7912-2001 Power cables with XLPE insulation and metallic sheath, and their accessories, for rated voltages from 66 kV (Um=72.5 kV) to 132kV (Um=145kV) - Requirements and test methods BS 7917-1999 Elastomer insulated fire resistant (limited circuit integrity) cables for fixed wiring in ships and on mobile and fixed offshore units - Requirements and test methods BS 7919-2001 Electric cables - Flexible cables rated up to 450/750V, for use with appliances and equipment intended for industrial and similar environments BS 7922-2004 Electric cables - Fluid-filled, paper- and PPL-insulated, metal-sheathed cables and accessories for alternating voltages up to and including 400 kV (Um = 420 kV) - Requirements and test methods BS 7923-2004 Electric cables - Internal gas-pressure cables and accessories for alternating voltages up to and including 275 kV (Um = 300 kV) - Requirements and test methods BS 7933-1-1998 Electric cables - Accessories - Material characterization - Resinous compounds before cure and in the cured state BS 7970-2005 Electric cables - Metallic wire and foil sheath constructions of power cables having XLPE insulation for rated voltages from 66kV (Um = 72.5 kV) to 132kV (Um = 145 kV) BS 8434-2-2003 Methods of test for assessment of the fire integrity of electric cables - Test for unprotected small cables for use in emergency circuits - BS EN 50200 with 930 deg flame and with water spray BS 8436-2004 Electric cables - 300/500 V screened electric cables having low emission of smoke and corrosive gases when affected by fire, for use in walls, partitions and building voids - Multicore cables BS 91-1998 Electric cable soldering sockets - Specification BS AU 16a-1989 Specification for electrical cable connectors (17.5 A maximum continuous rating) BS AU 255-1-1994 Road vehicle unscreened low tension cables - Specification for conductor sizes and dimensions for thick walled insulated cables BS AU 255-2-1994 Road vehicle unscreened low tension cables - Specification for conductor sizes and dimensions for thin walled insulated cables BS AU 267-1998 Code of practice for breakaway cables and secondary couplings BS AU 7a-1983 Specification for colour code for road vehicle electrical cables BS AU 88a-1985 Recommendations for ratings for light duty cables for automobile use BS AU 91-1965 Specification for dimensions of electrical cable connectors for starter battery taper terminal posts (cars and light commercial vehicles using positive earth system) BS DD CLC/TS 50429-2005 Optical fibre cables - Sewer cables - Family specification for cables to be installed in storm and sanitary sewers BS DD CLC/TS 50430-2005 Optical fibre cables - Gas pipe cables - Family specifications for cables to be installed in high pressure gas pipes BS DD CLC/TS 50431-2005 Optical fibre cables - Drinking water pipe cables - Family specification for cables to be installed in drinking water pipes BS DD ENV 13149-2-2000 Public transport - Road vehicle scheduling and control systems - WORLDFIP cabling specifications BS DD IEC/PAS 62338-2003 Screened balanced cables - Coupling attenuation measurement, triaxial method BS DD ISO/TS 16553-2006 Road vehicles - Data cables - Test methods and requirements BS EN 10257-1-1998 Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Land cables BS EN 10257-2-1998 Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Submarine cables BS EN 12548-1999 Lead and alloys - Lead alloy ingots for electric cable sheathing and for sleeves BS EN 12613-2001 Plastic warning devices for underground cables and pipelines with visual characteristics BS EN 13149-5-2004 Public transport - Road vehicle scheduling and control systems - CANopen cabling specifications BS EN 13920-3-2003 Aluminium and aluminium alloys - Scrap - Wire and cable scrap BS EN 175500-1997 Harmonized system of quality assessment for electronic components - Sectional specification:cable outlet accessories for connectors, including qualification approval and capability approval BS EN 186150-1997 Connector sets for optical fibres and cables - Type OCCA-BU BS EN 186160-1997 Connector sets for optical fibres and cables - Type OCCA-PC BS EN 186170-1998 Harmonized system of quality assessment for electronic components - Sectional specification:connector sets for optical fibres and cables - Type RCC BS EN 186260-1998 Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type SC BS EN 186270-1998 Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type LSH BS EN 186290-1998 Harmonized system of quality assessment for electronic components - Connector sets for optical fibres and cables - Type MPO BS EN 186300-1999 Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables type MSC BS EN 186310-1999 Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type MF BS EN 187105-2002 Single mode optical cable (duct/direct buried installation) BS EN 2083-2001 Aerospace series - Copper and copper alloy conductors for electrical cables - Product standard BS EN 2084-2005 Cables, electric, single-core, general purpose, with conductors in copper or copper alloy — Technical specification BS EN 2266-003-2005 Cables, electrical, for general purpose — Operating temperatures between -55 °C and 200 °C — Part 003: Ink jet printable — Product standard BS EN 2266-005-2005 Cables, electrical, for general purpose — Operating temperatures between??-55 ℃ and 200 ℃ — Part 005: UV laser printable — Product standard BS EN 2266-007-2005 Cables, electrical, for general purpose — Operating temperatures between –55 ℃ and 200 ℃ — Part 007: UV laser printable multicore jacketed cable — Product standard BS EN 2267-002-2005 Cables, electrical, for general purpose — Operating temperatures between -55 °C and 260 °C — Part 002: General BS EN 2267-003-2005 Cables, electrical, for general purpose — Operating temperatures between -55 °C and 260 °C— Part 003: Inkjet printable — Product standard BS EN 2267-007-2005 Cables, electrical, for general purpose — Operating temperatures between -55 °C and 260 °C — Part 007: DMA family, single ink-jet printable and multicore assembly — Product standard BS EN 2267-008-2005 Cables, electrical, for general purpose — Operating temperatures between -55 °C and 260 °C — Part 008: DM family, single UV laser printable and multicore assembly — Product standard BS EN 2267-009-2005 Cables, electrical, for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 009: DRA family, single and multicore assembly — Product standard BS EN 2267-010-2005 Cables, electrical, for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 010: DR family, single UV laser printable — Product standard BS EN 2591-609-2005 Elements of electrical and optical connection — Test methods — Part 609: Optical elements — Effectiveness of cable attachment — Cable cyclic flexing BS EN 2591-610-2001 Elements of electrical and optical connection - Test methods - Optical elements - Effectiveness of cable attachment - Cable pulling BS EN 2591-611-2001 Elements of electrical and optical connection - Test methods - Optical elements - Effectiveness of cable attachment - Cable torsion BS EN 2591-612-2001 Elements of electrical and optical connection - Test methods - Optical elements - Effectiveness of cable attachment - Cable axial compression BS EN 2713-003-2005 Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Screened (spiral) and jacketed, ink jet printable - Product standard BS EN 2713-007-2005 Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Screened (spiral) and jacketed, UV laser printable - Product standard BS EN 2714-002-2005 Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 002: Screened and jacketed — General BS EN 2714-003-2005 Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 003: Screened (spiral) and jacketed, ink jet printable — Product standard BS EN 2714-007-2005 Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 007: Screened (spiral) and jacketed, UV laser printable — Product standard BS EN 2714-011-2005 Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 011: DM family, screened (spiral) and jacketed, UV laser printable — Product standard BS EN 2714-012-2005 Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 012: DM family, screened (braided) and jacketed, UV laser printable — Product standard BS EN 2714-013-2005 Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 013: DR family, screened (spiral) and jacketed, UV laser printable — Product standard BS EN 2853-2005 Current ratings for electrical cables with conductor EN 2083 BS EN 3475-100-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - General BS EN 3475-201-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Visual examination BS EN 3475-202-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Mass BS EN 3475-301-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Ohmic resistance per unit length BS EN 3475-303-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Insulation resistance BS EN 3475-304-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Surface resistance BS EN 3475-305-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Overload resistance BS EN 3475-306-2005 Cables, electrical, aircraft use — Test methods — Part 306: Continuity of conductors BS EN 3475-307-2005 Cables, electrical, aircraft use — Test methods — Part 307: Corona extinction voltage BS EN 3475-401-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Accelerated ageing BS EN 3475-402-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Shrinkage and delamination BS EN 3475-403-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Delamination and blocking BS EN 3475-404-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Thermal shock BS EN 3475-405-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Bending at ambient temperature BS EN 3475-406-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Cold bend test BS EN 3475-407-2005 Cables, electrical, aircraft use — Test methods — Part 407: Flammability BS EN 3475-408-2005 Cables, electrical, aircraft use — Test methods — Part 408: Fire resistance BS EN 3475-409-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Air-excluded ageing BS EN 3475-410-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Thermal endurance BS EN 3475-411-2005 Cables, electrical, aircraft use — Test methods — Part 411: Resistance to fluids BS EN 3475-412-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Humidity resistance BS EN 3475-413-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Wrap back test BS EN 3475-414-2005 Cables, electrical, aircraft use — Test methods — Part 414: Differential scanning calorimeter (DSC test) BS EN 3475-415-2005 Cables, electrical, aircraft use — Test methods — Part 415: Rapid change of temperature BS EN 3475-416-2005 Cables, electrical, aircraft use — Test methods — Part 416: Thermal stability BS EN 3475-501-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Dynamic cut-through BS EN 3475-502-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Notch propagation BS EN 3475-503-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Scrape abrasion BS EN 3475-504-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Torsion BS EN 3475-505-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Tensile tests on conductors and strands BS EN 3475-506-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Plating continuity BS EN 3475-507-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Adherence of plating BS EN 3475-508-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Plating thickness BS EN 3475-509-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Solderability BS EN 3475-510-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Tensile strength and elongation of extruded insulation, sheath and jacket material BS EN 3475-511-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Cable-to-cable abrasion BS EN 3475-512-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Flexure endurance BS EN 3475-513-2005 Cables, electrical, aircraft use — Test methods — Part 513: Deformation resistance (Installation with plastic cable ties) BS EN 3475-603-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Resistance to wet arc tracking BS EN 3475-604-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Resistance to dry arc propagation BS EN 3475-605-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Wet short circuit test BS EN 3475-701-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Strippability and adherence of insulation to the conductor BS EN 3475-702-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Screen pushback capability BS EN 3475-703-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Permanence of manufacturer's marking BS EN 3475-704-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Flexibility BS EN 3475-705-2005 Cables, electrical, aircraft use — Test methods — Part 705: Contrast measurement BS EN 3475-706-2005 Cables, electrical, aircraft use — Test methods — Part 706: Laser markability BS EN 3475-801-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Capacitance per unit length BS EN 3475-802-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Capacitance unbalance BS EN 3475-803-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Capacitance variation BS EN 3475-804-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Velocity of propagation BS EN 3475-805-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Characteristic impedance BS EN 3475-806-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Attenuation BS EN 3475-807-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Transfer impedance BS EN 3475-808-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Cross-talk BS EN 3719-2005 Aluminium or aluminium alloy conductors for electrical cables — Product standard BS EN 3745-511-2002 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Cable to cable abrasion BS EN 4049-002-2005 Thermocouple extension cable — Operating temperatures between -65 °C and 260 °C — Part 002: General BS EN 4057-201-2005 Cable ties for harnesses — Test methods — Part 201: Visual examination BS EN 4057-202-2005 Cable ties for harnesses — Test methods — Part 202: Examination of mass and dimensions BS EN 4057-301-2005 Cable ties for harnesses — Test methods — Part 301: Salt mist test BS EN 4057-303-2005 Cable ties for harnesses — Test methods — Part 303: Resistance to fluids BS EN 4057-305-2005 Cable ties for harnesses -- Test methods -- Part 305: Coulor fastness?? BS EN 4057-405-2005 Cable ties for harnesses — Test methods — Part 405: Compass safe distance BS EN 4057-407-2005 Cable ties for harnesses — Test methods — Part 407: Verification of application tool settings BS EN 4165-013-2005 Connectors, electrical, rectangular, modular — Operating temperature 175 ℃ continuous??— Part 013: Cable clamp 2 and 4 modules for connectors, series 2 and series 3 — Product standard BS EN 4434-2005 Copper or copper alloy lightweight conductors for electrical cables — Product standard (Normal and tight tolerances) BS EN 45510-2-8-2004 Guide for procurement of power station equipment - Electrical equipment - Power cables BS EN 50083-10-2002 Cabled distribution systems for television and sound signals - System performance for return paths BS EN 50083-3-2002 Cabled distribution systems for television and sound signals - Active wideband equipment for coaxial cable networks BS EN 50083-4-1999 Cabled distribution systems for television and sound signals - Passive wideband equipment for coaxial cable networks BS EN 50083-5-2002 Cabled distribution systems for television and sound signals - Headend equipment BS EN 50083-7-1997 Cabled distribution systems for television and sound signals - System performance BS EN 50083-8-2002 Cabled distribution systems for television and sound signals - Electromagnetic compatibility for networks BS EN 50083-9-2003 Cabled distribution systems for television and sound signals - Interfaces for CATV/SMATV headends and similar professional equipment for DVB/MPEG-2 transport streams BS EN 50085-2-3-2001 Cable trunking and cable ducting systems for electrical installations - Particular requirements for slotted cable trunking systems intended for installation in cabinets - Section 3: Slotted in cabinets BS EN 50090-9-1-2005 Home and building electronic systems (HBES) - Installation requirements - Generic cabling for HBES class 1 twisted pair BS EN 50098-1-1999 Customer premises cabling for information technology - ISDN basic access BS EN 50098-2-1996 Customer premises cabling for information technology - 2048 kbit/s ISDN primary access and leased line network interface BS EN 50109-1-1996 Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - General requirements and tests BS EN 50109-2-1-1996 Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Radio frequency connectors and concentric contacts - Open throat tools with fixed dies, sizes A to E, V and W BS EN 50109-2-2-1996 Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Radio frequency connectors and concentric contacts - Open throat tools with removable and interchangeable dies, sizes A to G, Q to T, V and W BS EN 50109-2-3-1996 Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Contacts of electrical connectors BS EN 50109-2-4-1996 Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Centre contacts of RF connectors, series SMZ BS EN 50109-2-5-1996 Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Termination of twin-ax cable for databus applications BS EN 50117-1-2002 Coaxial cables - Part 1: Generic specification BS EN 50117-2-1-2005 Coaxial cables - Part 2-1: Sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz - 1000 MHz BS EN 50117-2-2-2004 Coaxial cables - Part 2-2: Sectional specification for cables used in cabled distribution networks - Outdoor drop cables for systems operating at 5 MHz - 1000 MHz BS EN 50117-2-3-2004 Coaxial cables - Part 2-3: Sectional specification for cables used in cabled distribution networks - Distribution and trunk cables for systems operating at 5 MHz - 1000 MHz BS EN 50117-2-4-2004 Coaxial cables - Sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz - 3000 MHz BS EN 50117-2-5-2004 Coaxial cables - Sectional specification for cables used in cabled distribution networks - Outdoor drop cables for systems operating at 5 MHz - 3000 MHz BS EN 50117-3-1-2002 Coaxial cables - Sectional specifications for cables used in telecom applications - Miniaturized cables used in digital communication systems BS EN 50117-3-1996 Coaxial cables used in cabled distribution networks - Part 3: Sectional specification for outdoor drop cables BS EN 50117-4-1996 Coaxial cables used in cabled distribution networks - Part 4: Sectional specification for distribution and trunk cables BS EN 50117-5-1997 Coaxial cables used in cabled distribution networks - Sectional specification for indoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz BS EN 50117-6-1997 Coaxial cables used in cabled distribution networks - Sectional specification for outdoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz BS EN 50143-1999 Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV BS EN 50146-2000 Cable ties for electrical installations BS EN 50173-1-2003 Information technology - Generic cabling systems - General requirements and office areas BS EN 50174-1-2001 Information technology - Cabling installation - Specification and quality assurance BS EN 50174-2-2001 Information technology - Cabling installation - Installation planning and practices inside buildings BS EN 50174-3-2004 Installation technology - Cabling installation - Installation planning and practices outside buildings BS EN 50200-2006 Method of test for resistance to fire of unprotected small cables for use in emergency circuits BS EN 50214-1998 Flexible cables for lifts BS EN 50249-2003 Electromagnetic locators for buried pipes and cables - Performance and safety BS EN 50262-1999 Cable glands for electrical installations BS EN 50264-1-2002 Railway applications - Railway rolling stock cables having special fire performance - Standard wall - General requirements BS EN 50264-2-2002 Railway applications - Railway rolling stock cables having special fire performance - Standard wall - Single core cables BS EN 50264-3-2002 Railway applications - Railway rolling stock cables having special fire performance - Standard wall - Multicore cables BS EN 50266-1-2001 Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus BS EN 50266-2-1-2001 Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category A F/R BS EN 50266-2-2-2001 Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category A BS EN 50266-2-3-2001 Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category B BS EN 50266-2-4-2001 Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category C BS EN 50266-2-5-2001 Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Small cables - Category D BS EN 50267-1-1999 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Apparatus BS EN 50267-2-1-1999 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Procedures - Determination of the amount of halogen acid gas - Determination of the amount of halogen acid gas BS EN 50267-2-2-1999 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity - Determination of degree of acidity of gases for materials by measuring pH and conductivity BS EN 50267-2-3-1999 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Procedures - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity BS EN 50288-1-2004 Multi-element metallic cables used in analogue and digital communication and control - Generic specification BS EN 50288-2-1-2004 Multi-element metallic cables used in analogue and digital communication and control - Horizontal and building backbone cables - Horizontal and building backbone cables BS EN 50288-2-2-2004 Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterized up to 100 MHz - Work area and patch cord cables BS EN 50288-3-1-2004 Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for unscreened cables characterized up to 100 MHz - Horizontal and building backbone cables BS EN 50288-3-2-2004 Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for unscreened cables - Work area and patch cord cables BS EN 50288-4-1-2004 Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterized up to 600 MHz - Horizontal and building backbone cables BS EN 50288-4-2-2004 Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterized up to 600 MHz - Work area and patch cord cables BS EN 50288-5-1-2004 Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterized up to 250 MHz - Horizontal and building backbone cables BS EN 50288-5-2-2004 Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterized up to 250 MHz - Work area and patch cord cables BS EN 50288-6-1-2004 Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for unscreened cables characterised up to 250 MHz - Horizontal and building backbone cables BS EN 50288-6-2-2004 Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for unscreened cables characterised up to 250 MHz - Work area and patch cord cables BS EN 50289-1-1-2001 Communication cables - Specifications for test methods - Electrical test methods - General requirements - General requirements BS EN 50289-1-10-2002 Communication cables - Specifications for test methods - Electrical test methods - Crosstalk BS EN 50289-1-11-2002 Communication cables - Specifications for test methods - Electrical test methods - Characteristic impedance, input impedance, return loss BS EN 50289-1-12-2005 Communication cables - Specifications for test methods - Electrical test methods - Inductance BS EN 50289-1-13-2004 Communication cables - Specifications for test methods - Electrical test methods - Coupling attenuation or screening attenuation of patch cords/coaxial cable assemblies/pre-connectorised cables BS EN 50289-1-14-2004 Communication cables - Specifications for test methods - Electrical test methods - Coupling attenuation or screening attenuation of connecting hardware BS EN 50289-1-15-2004 Communication cables - Specifications for test methods - Electromagnetic performance - Coupling attenuation of links and channels (laboratory conditions) BS EN 50289-1-2-2001 Communication cables - Specifications for test methods - Electrical test methods - DC resistance - d.c.resistance BS EN 50289-1-3-2001 Communication cables - Specifications for test methods - Electrical test methods - Dielectric strength - Dielectric strength BS EN 50289-1-4-2001 Communication cables - Specifications for test methods - Electrical test methods - Insulation resistance BS EN 50289-1-5-2001 Communication cables - Specifications for test methods - Electrical test methods - Capacitance - SEC5 : Capacitance BS EN 50289-1-6-2002 Communication cables - Specifications for test methods - Electrical test methods - Electromagnetic performance BS EN 50289-1-7-2001 Communication cables - Specifications for test methods - Electrical test methods - Velocity of propagation - sec7 : Velocity of propagation BS EN 50289-1-8-2001 Communication cables - Specifications for test methods - Electrical test methods - Attentuation - Sec8 : attentuation BS EN 50289-1-9-2002 Communication cables - Specifications for test methods - Electrical test methods - Unbalance attenuation (longitudinal conversion loss, longitudinal conversion transfer loss) BS EN 50289-3-1-2001 Communication cables - Specifications for test methods - Mechanical test methods - General requirements - General requirements BS EN 50289-3-10-2005 Communication cables - Specifications for tests methods - Mechanical test methods - Torsion and twisting BS EN 50289-3-11-2001 Communication cables - Specifications for test methods - Mechanical test methods - Cable cut-through resistance BS EN 50289-3-12-2001 Communication cables - Specifications for test methods - Mechanical test methods - Shot gun damage BS EN 50289-3-13-2003 Communication cables - Specifications for test methods - Mechanical test methods - Aeolian vibration BS EN 50289-3-15-2003 Communication cables - Specifications for test methods - Mechanical test methods - Underwater cable resistance to hydrostatic pressure BS EN 50289-3-16-2001 Communication cables - Specifications for test methods - Mechanical test methods - Cable tensile performance BS EN 50289-3-17-2002 Communication cables - Specifications for test methods - Mechanical test methods - Adhesion of dielectric and sheath BS EN 50289-3-2-2001 Communication cables - Specifications for test methods - Mechanical test methods - Tensile strength and elongation for conductor BS EN 50289-3-4-2001 Communication cables - Specifications for test methods - Mechanical test methods - Tensile strength, elongation and shrinkage of insulation and sheath BS EN 50289-3-5-2001 Communication cables - Specifications for test methods - Mechanical test methods - Crush resistance of the cable BS EN 50289-3-6-2001 Communication cables - Specifications for test methods - Mechanical test methods - Impact resistance of the cable BS EN 50289-3-7-2001 Communication cables - Specifications for test methods - Mechanical test methods - Abrasion resistance of the cable sheath BS EN 50289-3-8-2001 Communication cables - Specifications for test methods - Mechanical test methods - Abrasion resistance of cable sheath markings BS EN 50289-3-9-2001 Communication cables - Specifications for test methods - Mechanical test methods - Bending tests BS EN 50289-4-1-2001 Communication cables - Specifications for test methods - Environmental test methods - General requirements BS EN 50289-4-11-2002 Communication cables - Specifications for test methods - Environmental test methods - A horizontal integrated fire test method BS EN 50289-4-12-2004 Communication cables - Specifications for test methods - Environmental test methods - Vertical flame spread test on bunched small communication cables BS EN 50289-4-14-2003 Communication cables - Specifications for test methods - Environmental test methods - Lightning BS EN 50289-4-2-2001 Communication cables - Specifications for test methods - Environmental test methods - Water penetration BS EN 50289-4-6-2001 Communication cables - Specifications for test methods - Environmental test methods - Temperature cycling BS EN 50289-4-9-2001 Communication cables - Specifications for test methods - Environmental test methods - Pneumatic resistance BS EN 50290-1-1-2001 Communication cables - General BS EN 50290-1-2-2004 Communication cables - Definitions BS EN 50290-2-1-2005 Communication cables - Common design rules and construction BS EN 50290-2-20-2001 Communication cables - Common design rules and construction - General BS EN 50290-2-21-2002 Communication cables - Part 2-21: Common design rules and construction - PVC insulation compounds BS EN 50290-2-22-2002 Communication cables - Part 2-22: Common design rules and construction - PVC sheathing compounds BS EN 50290-2-23-2002 Communication cables - Part 2-23: Common design rules and construction - PE insulation BS EN 50290-2-24-2002 Communication cables - Common design rules and construction - PE sheathing BS EN 50290-2-25-2002 Communication cables - Common design rules and construction - Polypropylene insulation compounds BS EN 50290-2-26-2002 Communication cables - Common design rules and construction - Halogen free flame retardant insulation compounds BS EN 50290-2-27-2002 Communication cables - Common design rules and construction - Halogen free flame retardant thermoplastic sheathing compounds BS EN 50290-2-28-2002 Communication cables - Common design rules and construction - Filling compounds for filled cables BS EN 50290-2-29-2002 Communication cables - Common design rules and construction - Cross-linked PE insulation compounds BS EN 50290-2-30-2002 Communication cables - Common design rules and construction - Poly(tetrafluoroethylene-hexafluoropropylene) (FEP) insulation and sheathing BS EN 50290-4-1-2002 Communication cables - General considerations for the use of cables - Environmental conditions and safety aspects BS EN 50299-2002 Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV BS EN 50300-2004 Low-voltage switchgear and controlgear assemblies - General requirements for low-voltage substation cable distribution boards BS EN 50306-1-2002 Railway applications - Railway rolling stock cables having special fire performance - Thin wall - General requirements BS EN 50306-2-2002 Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Single core cables BS EN 50306-3-2002 Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Single core and multicore cables (pairs, triples and quads) screened and thin wall sheathed BS EN 50306-4-2002 Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Multicore and multipair cables standard wall sheathed BS EN 50307-2003 Lead and lead alloys - Lead and lead alloy sheaths and sleeves of electric cables BS EN 50334-2001 Marking by inscription for the identification of cores of electric cables BS EN 50336-2002 Bushings for transformers and reactor cable boxes not exceeding 36 kV BS EN 50340-2002 Hydraulic cable cutting devices - Devices to be used on electrical installations with nominal voltage up to AC 30 kV BS EN 50343-2003 Railway applications - Rolling stock - Rules for installation of cabling BS EN 50346-2003 Information technology - Cabling installation - Testing of installed cabling BS EN 50355-2003 Railway applications - Railway rolling stock cables having special fire performance - Thin wall and standard wall - Guide to use BS EN 50356-2002 Method for spark testing of cables BS EN 50362-2003 Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits BS EN 50363-0-2005 Insulating, sheathing and covering materials for low voltage energy cables - General introduction BS EN 50363-1-2005 Insulating, sheathing and covering materials for low voltage energy cables — Part 1: Cross-linked elastomeric insulating compounds BS EN 50363-2-1-2005 Insulating, sheathing and covering materials for low voltage energy cables — Part 2-1: Cross-linked elastomeric sheathing compounds BS EN 50363-2-2-2005 Insulating, sheathing and covering materials for low voltage energy cables — Part 2-2: Cross-linked elastomeric covering compounds BS EN 50363-3-2005 Insulating, sheathing and covering materials for low voltage energy cables - Part 3: PVC insulating compounds BS EN 50363-4-1-2005 Insulating, sheathing and covering materials for low voltage energy cables — Part 4-1: PVC sheathing compounds BS EN 50363-4-2-2005 Insulating, sheathing and covering materials for low voltage energy cables — Part 4-2: PVC covering compounds BS EN 50368-2003 Cable cleats for electrical installations BS EN 50369-2005 Liquid tight sheathing systems for cable management BS EN 50406-1-2004 End user multi-pair cables used in high bit rate telecommunication networks - Aerial cables BS EN 50406-2-2004 End user multi-pair cables used in high bit rate telecommunication networks - Duct and buried cables BS EN 50407-1-2004 Multi-pair cables used in high bit rate digital access telecommunication networks - Outdoor cables BS EN 50414-2006 Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables - Method A: Total lead content determination with flame excitation atomic absorption spectrometry - Method B: Qualitative analysis of lead by lead sulphide staining BS EN 60169-24-1994 Radio-frequency connectors - Radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (Type F) BS EN 60169-25-1994 Radio-frequency connectors - Two-pole screw (3/4-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (0,534 in) (Type TWHN) BS EN 60228-2005 Conductors of insulated cables BS EN 60230-2002 Impulse tests on cables and their accessories BS EN 60332-1-1-2005 Tests on electrical and optical cables under fire conditions - Test for a vertical flame propagation for a single insulated wire or cable - Apparatus BS EN 60332-1-2-2004 Tests on electric and optical fibre cables under fire conditions - Test for vertfical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame BS EN 60332-1-3-2004 Tests on electric and optical fibre cables under fire conditions - Test for vertical flame propagation for a single vertical insulated wire or cable - Procedure for determination of flaming droplets/particles BS EN 60332-2-1-2005 Tests on electric and optical fibre cables under fire conditions - Test for vertical flame propagation for a single small insulated wire or cable - Apparatus BS EN 60332-2-2-2004 Tests on electric and optical fibre cables under fire conditions - Tests for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame BS EN 60371-3-8-1996 Specification for insulating materials based on mica - Specifications for individual materials - Mica paper tapes for flame-resistant security cables BS EN 60439-5-1996 Specification for low-voltage switchgear and controlgear assemblies - Particular requirements for assemblies intended to be installed outdoors in public places - Cable distribution cabinets (CDCs) for power distribution in networks BS EN 60465-1992 Specification for unused insulating mineral oils for cables with oil ducts BS EN 60526-2005 High-voltage cable plug and socket connections for medical X-ray equipment BS EN 60603-9-1998 Connectors for frequencies below 3 MHz for use with printed boards - Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in) BS EN 60702-1-2002 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V. Cables BS EN 60702-2-2002 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V. Terminations BS EN 60719-1993 Calculation for the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V BS EN 60728-6-2003 Cable networks for television signals, sound signals and interactive services - Optical equipment BS EN 60728-7-1-2005 Cable networks for television signals, sound signals and interactive services - Hybrid fibre coax outside plant status monitoring - Physical (PHY) layer specification BS EN 60728-7-2-2005 Cable networks for television signals, sound signals and interactive services - Hybrid fibre coax outside plant status monitoring - Media access control (MAC) layer specification BS EN 60728-7-3-2005 Cable networks for television signals, sound signals and interactive services - Hybrid fibre coax outside plant status monitoring - Power supply to transponder interface bus (PSTIB) - Specification BS EN 60794-1-1-2002 Optical fibre cables - Generic specification - General BS EN 60794-1-2-2003 Optical fibre cables - Generic specification - Basic optical cable test procedures BS EN 60794-2-11-2005 Optical fibre cables — Part 2-11: Indoor cables — Detailed specification for simplex and duplex cables for use in premises cabling BS EN 60794-2-21-2006 Optical fibre cables - Part 2-21: Indoor cables - Detailed specification for multi-fibre optical distribution Cables for use in premises cabling BS EN 60794-2-31-2006 Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling BS EN 60794-3-10-2002 Optical fibre cables - Outdoor cables - Family specification for duct and directly buried optical telecommunication cables BS EN 60794-3-20-2003 Optical fibre cables - Outdoor cables - Family specification for optical self-supporting aerial telecommunication cables BS EN 60794-3-2002 Optical fibre cables - Sectional specification - Outdoor cables BS EN 60811-1-1-1995 Insulating and sheathing materials of electric cables - Common test methods - General application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties - Section 1: Measurement of thickness and overall dimensions - Tests for determining the mechanical properties BS EN 60811-1-2-1995 Insulating and sheathing materials of electric cables - Common test methods - General application - Thermal ageing methods BS EN 60811-1-3-1995 Insulating and sheathing materials of electric cables - Common test methods - General application - Methods for determining the density - Water absorption tests - Shrinkage test - Section 3: Methods for determining the density - Water absorption tests - Shrinking test BS EN 60811-1-4-1995 Insulating and sheathing materials of electric cables - Common test methods - General application - Tests at low temperature BS EN 60811-2-1-1998 Insulating and sheathing materials of electric cables - Common test methods - Methods specific to elastomeric compounds - Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests BS EN 60811-3-1-1995 Insulating and sheathing materials of electric cables - Common test methods - Methods specific to PVC compounds - Pressure test at high temperature - Tests for resistance to cracking BS EN 60811-3-2-1995 Insulating and sheathing materials of electric cables - Common test methods - Methods specific to PVC compounds - Loss of mass test - Thermal stability test BS EN 60811-4-1-2004 Insulating and sheathing materials of electric and optical cables - Common test methods - Methods specific to polypropylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon black and/or mineral filter content measurement in PE by direct combustion - Measurement of carbon black content by TGA - Assessment of carbon black dispersion in polyethylene using a microscope BS EN 60811-4-2-2004 Insulating and sheathing materials of electric and optical cables - Common test methods - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature - Wrapping test after conditioning at elevated temperature - Wrapping test after thermal ageing in air - Measurement of mass increase - Long-term stability test - Test method for copper-catalyzed oxidative degradation BS EN 60811-5-1-2000 Insulating and sheathing materials of electric and optical fibre cables - Common test methods - Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 °C - D.C. resistivity at 23 °C and 100 °C BS EN 60874-17-1997 Connectors for optical fibres and cables - Sectional specification for fibre optic connector - Type F-05 (friction lock) BS EN 60885-2-2003 Electrical test methods for electric cables - Partial discharge tests BS EN 60885-3-2003 Electrical test methods for electric cables - Test methods for partial discharge measurements on lengths of extruded power cables BS EN 60966-1-1999 Radio frequency and coaxial cable assemblies - Generic specification - General requirements and test methods BS EN 60966-2-1-2003 Radio frequency and coaxial cable assemblies - Sectional specification for flexible coaxial cable assemblies BS EN 60966-2-2-2003 Radio frequency and coaxial cable assemblies - Blank detail specification for flexible coaxial cable assemblies BS EN 60966-2-3-2003 Radio frequency and coaxial cable assemblies - Detail specification for flexible coaxial cable assemblies BS EN 60966-2-4-2003 Radio frequency and coaxial cable assemblies - Detail specification for cable assemblies for radio and TV receivers Frequency range 0 to 3000 MHz, IEC 61169-2 connectors BS EN 60966-2-5-2003 Radio frequency and coaxial cable assemblies - Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 to 1000 MHz, IEC 61169-2 connectors BS EN 60966-2-6-2003 Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 to 3000 MHz, IEC 61169-24 connectors BS EN 60966-3-1-2003 Radio frequency and coaxial cable assemblies - Blank detail specification for semi-flexible coaxial cable assemblies BS EN 60966-3-2-2003 Radio frequency and coaxial cable assemblies - Detail specification for semi-flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz) BS EN 60966-3-2003 Radio frequency and coaxial cable assemblies - Sectional specification for semi-flexible coaxial cable assemblies BS EN 60966-4-1-2003 Radio frequency and coaxial cable assemblies - Blank detail specification for semi-rigid coaxial cable assemblies BS EN 60966-4-2003 Radio frequency and coaxial cable assemblies - Sectional specification for semi-rigid coaxial cable assemblies BS EN 61034-2-2005 Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements BS EN 61076-3-103-2004 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC) BS EN 61076-4-103-1999 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Printed board connectors - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm - Cable to board connectors, shielded against EMC ,grid 2,5 mm,for high speed data rates,for use with printed boards BS EN 61076-4-108-2003 Connectors for electronic equipment - Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1 BS EN 61076-4-110-2002 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Printed board connectors - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function BS EN 61076-7-001-2004 Connectors for electronic equipment - Cable outlet accessories - Blank detail specification BS EN 61138-1998 Cables for portable earthing and short-circuiting equipment BS EN 61169-24-2002 Radio-frequency connectors - Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (type F) BS EN 61196-2-2003 Radio-frequency cables - Specifications - Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation BS EN 61196-3-1999 Radio-frequency cables - Specifications - Sectional specification for coaxial cables for local area networks BS EN 61196-3-2-1998 Radio-frequency cables - Specifications - Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with solid dielectric for local area networks of 185 m reach and up to 10 Mb/s BS EN 61196-3-3-1998 Radio-frequency cables - Specifications - Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with foamed dielectric for local area networks of 185 m reach and up to 10 Mb/s BS EN 61196-4-2004 Coaxial communication cables - Sectional specification for radiating cables BS EN 61238-1-2003 Compression and mechanical connectors for power cables for rated voltages up to 36 kV (Um = 42 kV) - Test methods and requirements BS EN 61242-1998 Electrical accessories - Cable reels for household and similar purposes BS EN 61280-1-1-1998 Optical fibre amplifiers.Basic spectrum analyzers - Transmitter output optical power measurement for single-mode optical fibre cable BS EN 61280-4-2-2000 Fibre optic communication subsystem basic test procedures - Fibre optic cable plant - Single-mode fibre optic cable plant attenuation BS EN 61300-2-35-1997 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Cable nutation BS EN 61300-2-37-1997 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Cable bending for closures BS EN 61300-2-4-1997 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Fibre/cable retention BS EN 61313-1-1997 Fibre optic passive components and cable assemblies - Capability approval - Generic specification BS EN 61316-2000 Industrial cable reels BS EN 61386-1-2004 Conduit systems for cable management - General requirements BS EN 61386-21-2004 Conduit systems for cable management - Particular requirements - Rigid conduit systems BS EN 61386-22-2004 Conduit systems for cable management - Particular requirements - Pliable conduit systems BS EN 61386-23-2004 Conduit systems for cable management - Particular requirements - Flexible conduit systems BS EN 61442-2005 Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV) BS EN 61515-1996 Mineral insulated thermocouple cables and thermocouples BS EN 61537-2002 Cable tray systems and cable ladder systems for cable management BS EN 61726-2000 Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method BS EN 61935-1-2005 Testing of balanced communication cabling in accordance with standards series EN 50173 — Part 1: Installed cabling BS EN 61935-2-2005 Testing of balanced communication cabling in accordance with standards series EN 50173 — Part 2: Patch cords and work area cords BS EN 62012-1-2002 Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Generic specification BS EN 62037-2000 RF connectors, connector cable assemblies and cables - Intermodulation level measurement BS EN 62153-1-1-2004 Metallic communication cables test methods - Electrical - Measurement of the pulse/step return loss in the frequency domain using the inverse discrete fourier transformation(IDFT) BS EN 62153-4-2-2004 Metallic communication cable test methods - Electromagnetic compatibility - Screening and coupling attenuation - Injection clamp method BS EN ISO 10807-1997 Pipework - Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmosphere BS EN ISO 5828-2001 Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics BS EN ISO 6551-1983 Petroleum liquids and gases - Fidelity and security of dynamic measurement - Cabled transmission of electric and/or electronic pulsed data BS EN ISO 8205-1-2002 Water-cooled secondary connection cables for resistance welding - Dimensions and requirements for double-conductor connection cables BS EN ISO 8205-2-2002 Water-cooled secondary connection cables for resistance welding - Dimensions and requirements for single-conductor connection cables BS EN ISO 8205-3-1997 Water-cooled secondary connection cables for resistance welding - Test requirements BS G 177-1961 Specification for Nyvin type electrical cables for aircraft BS G 184 to G 188-1964 Specification for aluminium terminal ends and in-line connectors for hexagonal crimping to aircraft aluminium electrical cables BS G 189-1964 Specification for Tersil type electrical cables for aircraft BS G 192-1965 Specification for Efglas type electric cables with copper conductors for aircraft BS G 195-1966 Specification for Minyvin type electric cables for aircraft BS G 198-5-1997 Sleeves for aircraft electric cables and equipment wires - Specification for heat shrinkable moulded shapes BS G 212-1971 Specification for general requirements for aircraft electrical cables BS G 222-1976 Specification for Efglas type electric cables (metric units) BS G 227-1979 Specification for Tersil type electric cables (metric units) BS G 235-1987 Specification for electric cables for general airframe or equipment interconnect use (150 °C), wrapped insulation with silver plated conductors BS G 236-1987 Specification for electric cables for general airframe or equipment interconnect use (200 °C), wrapped insulation with nickel plated conductors BS G 237-1987 Specification for electric cables for general airframe or equipment interconnect use (200 °C), extruded insulation with nickel plated conductors BS G 241-1988 Specification for fire proof electric cables for engine fire zone and airframe use BS G 243-1990 Specification for igniter cables for engine use (4 kV d.c.) BS G 246-1991 Specification for cable ties for installation under controlled tension on aircraft electric cable harnesses BS G 250-1994 Specification for identification marking of electric cables BS G 258-1995 Glossary of terms for electrical cables and cable harnesses BS IEC 60287-1-3-2003 Electric cables - Calculation of the current rating - Current rating equations (100 % load factor) and calculation of losses - Current sharing between parallel single-core cables and calculation of circulating current losses BS IEC 60313-2002 Coaxial connectors used in nuclear laboratory instrumentation BS IEC 60853-3-2002 Calculation of the cyclic and emergency current rating of cables - Cyclic rating factor for cables of all voltages, with partial drying of the soil BS IEC 60874-14-1-1998 Connectors for optical fibres and cables - Detail specification for fibre optic connector type SC-PC standard terminated to multimode fibre type A1a, A1b BS IEC 61000-5-2-1998 Electromagnetic compatibility (EMC) - Installation and mitigation guidelines - Earthing and cabling BS ISO 13990-3-2006 Textile machinery and accessories - Yarn feeders and yarn control for knitting machines - Dimensions for connecting and interconnection cables BS ISO 3808-2003 Road vehicles - Unscreened high-voltage ignition cables - General specifications, test methods and requirements BS ISO 4141-1-2006 Road vehicles - Multi-core connecting cables - Test methods and requirements for basic performance sheathed cables BS ISO 6856-2005 Road vehicles - Unscreened high-voltage ignition cable assemblies - Test methods and general requirements BS ISO/IEC 11458-1994 Information technology. Microprocessor systems. VICbus. Inter-crate cable bus BS ISO/IEC 14709-1-1997 Information technology - Configuration of customer premises cabling (CPC) for applications - ISDN basic access BS QC 221300-1997 Radio-frequency connectors - RF coaxial connectors with inner diameter of outer conductor 3 mm (0,12 in) with snap-on coupling - Characteristic impedance 50 ohms (Type SMB) DD ENV 13149-2-2000 Public transport. Road vehicle scheduling and control systems. WORLDFIP cabling specifications DD IEC PAS 62255-1-2001 Multi-pair cables used in high bit rate digital access telecommunication networks. Outdoor Cables FD Z 86-154-1997 DIGITAL VIDEO BROADCASTING (DVB). IMPLEMENTATION GUIDELINES FOR THE USE OF MPEG-2 SYSTEMS. VIDEO AND AUDIO IN SATELLITE AND CABLE BROADCASTING APPLICATIONS. KIT 79-2001 Information technology - Cabling systems pack PD 6580-2-1995 Home and building electronic systems.Technical report 1. Guidelines for the professional installation of Twisted Pair cables class 1

Instant Messaging

WhatsApp :

+852 6230 0392

Read more

Skype :

Caledonian Cables

You will get efficient and thoughtful service from Mingda.

live:1cb87739a29fb08c

Wechat :

The personal information you enter is only used to reply to your message, It will not be leaked or used for other purposes.

Featured content:
How to choose the best medium voltage power cable?

BS standards cable - Caledonian Cables

British Standard Cables - BS CableBS Cables