KANGERTONG - Professional China Scomi Prima 3G/4G/5G ...

Derrock HYP PMD Shaker Scren, Professional China Scomi Prima 3G/4G/5G Shaker Screen - Replacement Screen for Scomi Prima 3G4G5G &#; KANGERTONG Detail:

Description

We constantly function like a tangible group to ensure that we can give you the very best high-quality and also the very best cost for Brandt VSM 100 Primary Shaker Screen Vortex Orbital PT Oil Shale Shaker Screen , Passion, Honesty, Sound service, Keen cooperation and Development are our goals. We are here expecting friends all over the world!Professional China Scomi Prima 3G/4G/5G Shaker Screen - Replacement Screen for Scomi Prima 3G4G5G &#; KANGERTONG Detail:

Shengjia are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.

KET-SG shaker screen, also commonly called Scomi prima 3G/4G/5G screen, refers to the replacement screen for Scomi Prima series shale shakers. The main shaker models are including SCM-PrimaG 3P/4P/5P linear motion shale shaker and SCM-PrimaG 4PDD cascading shale shaker. Screen quantity correspondingly varies by the different shaker models. The whole screen cloth is divided into independent small surfaces by rectangle perforated holes to prevent the part excessive expansive damaged.

Adaptable Shale Shaker Model

KET-SG shaker screens are used as the substitute screen for

SCM-PrimaG 3P linear motion shale shaker (3-panel).
SCM-PrimaG 4P linear motion shale shaker (4-panel).
SCM-PrimaG 4PDD cascading shale shaker (4-panel).
SCM-PrimaG 5P linear motion shale shaker (5-panel).

Competitive Advantage

100% interchangeable with OEM brands screen panel size.
SS 304/316 wire mesh cloth, triple layered sandwich construction.
Bonded to perforated panel, rugged structural support.
Manufactured according to the API RP 13C (ISO ).
Scientific & reasonable cost control system for competitive price.
Adequate inventory in the shortest time to meet customers&#; demand.
Warranty Period: 1 year.
Working Life: 400&#;450 hours.

Performance Parameter

Screen Designation API RP 13C Designation Conductance Number D100 Separation (Microns) Non-Blank Area (Sq.ft) KET-SG-A325 API 325 0.38 48.8 5.56 KET-SG-A270 API 270 0.39 53.8 5.56 KET-SG-A230 API 230 0.51 63.4 5.56 KET-SG-A200 API 200 0.71 77.8 5.56 KET-SG-A170 API 170 0.88 91.8 5.56 KET-SG-A140 API 140 1.22 114.6 5.56 KET-SG-A120 API 120 1.48 120.1 5.56 KET-SG-A100 API 100 2.06 142.5 5.56 KET-SG-A80 API 80 3.55 5.56 KET-SG-A70 API 70 4.71 216.6 5.56 KET-SG-A60 API 60 5.87 256.8 5.56 KET-SG-A50 API 50 6.62 321.0 5.56 KET-SG-A45 API 45 6.72 377.2 5.56 KET-SG-A35 API 35 7.96 517.8 5.56 KET-SG-A20 API 20 9.01 862.2 5.56 * D100: Particles this size and larger will normally be discarded.* API: Corresponding API sieve equivalent as per API RP 13C.* Conductance No.: This represents the ease with which a liquid can flow through the screen. Larger values represent higher volume handing.

Product detail pictures:







Related Product Guide:
Our eternal pursuits are the attitude of regard the market, regard the custom, regard the science and the theory of quality the basic, trust the first and management the advanced for Professional China Scomi Prima 3G/4G/5G Shaker Screen - Replacement Screen for Scomi Prima 3G4G5G &#; KANGERTONG, The product will supply to all over the world, such as: Nicaragua, Tanzania, Denmark, Why we can do these? Because: A, We are honest and reliable. Our items have high quality, attractive price, sufficient supply capacity and perfect service. B, Our geographical position has a big advantage . C, Various types: Welcome your inquiry, It might be highly appreciated.

Product detail pictures:Related Product Guide:Our eternal pursuits are the attitude of regard the market, regard the custom, regard the science and the theory of quality the basic, trust the first and management the advanced for Professional China Scomi Prima 3G/4G/5G Shaker Screen - Replacement Screen for Scomi Prima 3G4G5G &#; KANGERTONG, The product will supply to all over the world, such as: Nicaragua, Tanzania, Denmark, Why we can do these? Because: A, We are honest and reliable. Our items have high quality, attractive price, sufficient supply capacity and perfect service. B, Our geographical position has a big advantage . C, Various types: Welcome your inquiry, It might be highly appreciated.

Finally, if you have a special criterion such as absence declarations and food contact, work with your supplier to address these needs. The FDA has a specific process defined to achieve a letter of Non Objection (LNO), which is one criterion for food contact. PCR should not be used for food contact applica-tions unless it has explicit statements indicating that it is safe to do so an LNO is only one piece of the entire picture.

Most plastic manufacturers can attest that PCR often has a different odor compared to virgin plastic. Good PCR suppliers address odor early in the recycling process. It is critical to remove paper labels and cellulosic/organic contamination in the wash step to prevent particles from charring during the ex trusion process. Devolatilization and deodorizing additives are secondary activities that can improve perceived odors. Ask your supplier if any of these steps are included in their process.

You should ask your PCR supplier if any additives have been added, such as slip or blocking agents. These additives can have a negative impact on your product performance. Anti-blocking agents can interfere with tackiness required for stretch films for instance. There are beneficial additives that you also want to ask about. Antioxidants may improve PCR stability and film performance. If you think the PCR needs stabilization, collaborate with your resin supplier.

Exploring how much PCR to use in your product design is key in applications development and should be done on a case by case basis. The level of PCR content often depends on cleanliness (gels or impurities), physical property retention, and desired aesthet ics. For cleanliness and gel level, ask your supplier about their cleaning steps and their melt filtration capabilities. For physical property retention, matching density is important and if this is not possible consider what can be done to offset the resulting change in performance. With regards to aesthetics, our advice is to embrace the ugly! PCR is not likely to look as good as virgin, even if the utmost care is taken in its production. Let the different aesthetic start telling the story for the consumer to understand that PCR is being used in your product design the sustainability messaging is a key component to driving growth in the circu lar economy!

Since PCR is often used as a blend component, it is important to understand how the PCR properties will affect your overall perfor mance. The first step in using a PCR blend is to compare the phys ical property performance of PCR to a virgin resin. Make sure you choose the right resin to conduct a fair comparison try to align the MI and density of the PCR to your comparative virgin resin. Physical property retention can be quite good provided the PCR is high qual ity and free of contamination. If performance falls short, consider changing to a higher performance virgin resin in the blend to over come the slight reduction in performance.

Melt Flow Ratio is a good indicator for processability a higher number indicates it will be easier to process. Also, it is important to align the source of PCR to your final product and processing needs if your process requires a melt index of 2 or above, it is ideal to find a PCR to suit your needs rather than try to work with a fractional melt that will make processing difficult and frustrating. Resin suppli ers have a role to play here as well, as PCR can be provided as a melt compounded blend with virgin resin to alleviate issues such as MI mismatch.

The melt index, melt flow ratio, and density are basic properties that should be communicated on every lot of PCR. We offer some observations that will make your experience with PCR align better with expectations. While PCR rheology curves may look similar to virgin resins, it is important to un derstand the shear thinning behavior and melt strength of the resin during processing. For instance, if LDPE is present in a LLDPE based PCR, the resin will process as if it has a higher MFI than indicat ed. Care should also be given to selecting a PCR based on density values only. Mineral fillers are of ten present which can make the density will appear to be higher than the actual base polymer density. Ash is a good property to evaluate along with density.

Reducing plastic waste in our environment requires the use of materials that are most likely to be disposed in landfills and do so on a continuous and substantial way. Use of wide spec does not reduce plastic waste at all and PIR waste streams can often be used back into the source product making PIR simply good manufacturing practice. Repro consumption keeps plastic waste out of landfills; however, supply is often variable and uncertain. This leaves PCR as the best solution when your goal is to formulate a product that incorporates recycle. Predictable supply and manageable consistency gives you the abil ity and the confidence to make a recycle based product that can then be marketed for its positive environmental impact.

And finally, wide spec resin is not a recycled product. It is a virgin resin that has not been trans formed in any way. Wide spec generally consists of resin that is out of specification or has a perfor mance range wider than the intended specification.

PIR can typically be used back in the original process and is less likely to end up in a landfill. Repro is short for Reprocessed. This is a plasticmade mostly from post-industrial parts that are ground into small format and then pelletized. The transformation of the plastic into a part has made the resin unusable back in the original product.

Post-consumer recycled is defined as having served its purpose; after the products intended use in the market, it is collected, processed, cleaned and repelletized into PCR resin. When plastic is transformed into a product, then lost in manufacturing due to change over, overruns, and mistakes, it can be reprocessed back into a resin format. However, since it never served its intended use by cus tomers, it is considered Post-industrial recycled resin.

Before you embark on this worthy journey, we want you to know more about PCR

If you make flexible polyethylene films, an obvious way to reduce plastic waste is to use PCR resin in your products. This might feel like a challenge for a number of reasons.

Are you thinking about incorporating Post-Consumer Recycled (PCR) resins into your flexible film products? The world is demanding that we address the issue of plastic waste (can add an impactful reference here such as According to Greenpeace, the volume of the packaging material used by the e-commerce sector was 9.4 million tons in , and it is expected to reach 41.3 million tons by . Also, about 850,000 metric ton of plastic waste was produced by the package-delivery sector in ).

Consistent pellet color and size, low odor and minimal contamination are all indicators of high-quality PCR. 

Eliminating plastic waste in the environment is critical to the health of our planet and the health of our industry. Circularity is being advanced with downgauging and lightweighting, and processors are working with brand owners to redesign packaging for recyclability and to incorporate post-consumer resin (PCR) and other recycled content.

As you embark on this endeavor, learn as much as you can about the PCR that is available today. Understanding what to expect when working with recycled resin is critical as we continue to drive improvements of both the quality and quantity of recycled plastics. It will give you more confidence and improve your success in incorporating this sustainable material into new packaging and products.  Here are eight questions whose answers will help put you on the right track.
  

1. How is PCR Different from PIR and Rework?

PCR is defined as plastic that has served its defined purpose. After its intended use, it is collected, cleaned and repelletized to be used in new plastic articles or packaging. Post-industrial (PIR) resin, on the other hand, is typically resin that has been converted into a product that is out of specification or not saleable, and thus has never reached the customer or consumer. This product can still be collected and diverted from landfill and used in new products or packaging.

Rework is waste generated within a manufacturing process that is reused within the same process rather than sold to another manufacturer. The ability to use rework as a feedstock is considered a best practice in manufacturing. This resin is very close to virgin resin in quality since it has only experienced one additional heat or processing history. Examples include tips and tails from blow molding, runners from injection molding, and edge trim from film or sheet production. Rework is considered distinct from PCR and PIR, as it is reused back in the same process that created it. As such, it is not considered a recycled product.

Products must be designed to be recycled or upcycled rather than downcycled or landfilled; and to fully close the loop, the materials in them must be incorporated back into new products. PCR is the primary focus for most participants in the value chain, and reincorporating it into new products and packaging is critical to circularity.  
 

This plant food pouch prototype was made by Nova with 20% PCR content.

2. What Properties and Processibility Should You Expect from PCR Resins?

Melt index (MI), melt-flow ratio (MFR) and density are basic properties that should be communicated on every lot of PCR. Since PCR is often used as a blend component, these properties will affect blend compatibility, which will affect overall performance.

For PE-PCR, sophisticated rheology curves are more commonly used with virgin resin, but understanding whether LDPE is present in a LLDPE PCR is important to predict the shear-thinning behavior and melt strength during processing. While it is difficult to quantify the level of LDPE in a specific batch of LLDPE PCR, understanding whether it is present in the incoming recovered plastic stream is a good start.

The processability of PCR can be affected by contaminants, especially if they do not melt at temperatures used for PE extrusion. PET is a good example, as its higher melt temperature will result in blockage of the extruder screen pack, building up backpressure and potentially causing downtime. Foreign contaminants such as cellulose or wood fibers can also result in screen-pack buildup. A good rule of thumb is that your PCR supplier should be using mesh filtration one step finer than that which is used on your extrusion equipment. This will ensure that most contaminants are filtered out in their process and will not result in processing issues at your extruder.

The processability of PCR can be affected by contaminants.

The breadth of the molecular-weight distribution can be approximated by the MFR and is a good indication of processability. A higher number generally indicates that it is easier to process.

If mineral fillers such as talc or calcium carbonate are present, the density reported on the product data sheet may appear to be higher than the actual base polymer density. The presence of mineral fillers can be determined through ash testing, with a rough rule of thumb being for every 1% ash content the density will shift by approximately 0.01 g/cc, and then true PCR density can be calculated from there.

3. What Should You Look for in Your PCR to Ensure the Best Quality Finished Goods?

Consistent pellet color and size, low odor, and minimal contamination are all indicators of high-quality PCR. Consistency of MI will drive consistency in processing the PCR, and is highly sought after by converters.

On the supply side, this is being addressed by controlled sourcing, material sortation, and blending. Blending can occur both on the incoming source stream as well as the final PCR pellets to achieve a higher degree of homogenization. Blending silos and a high degree of testing and monitoring can allow a recycler to deliver a consistent MI that can even be comparable to wide-spec virgin resin (±30%).

In addition, it is helpful to try to source PCR from the same or similar stream as the anticipated end usethis is called like-for-like recycling. For a flexible film such as shrink film, looking to source PCR from film sources such as back-of-store or distribution-center film, or even agricultural film, will ensure that the properties are more similar to the displaced virgin content and thus more ideal. This alignment is driving many to investigate closed-loop opportunities, where specific packages or articles are collected to be incorporated back into the same type of product.

It is helpful to try to source PCR from the same or similar stream as the anticipated end use.

Similarly, the best PCR source for food-contact applications currently is one thats directly traceable to a food-contact application in the first lifetime, even if the form factor is different. A well-known example is recycled HDPE sourced from milk jugs. As this stream is highly sought after and in short supply, we are seeing that issues such as MI mismatch and homopolymer density are being overcome in diverse end uses such as flexible film and caps and closures.

Sourcing PCR from a product made with the same conversion process is another good strategy. Recycled content produced by blown film extrusion will be easier to incorporate back into blown film than it would in cast film, which requires a higher melt index. The same is true for injection molding, which requires an even higher MI, so starting with an article that was made by blow molding would present processing challenges.

If you are looking for more details, kindly visit Scomi Prima 3G/4G/5G Screen.

Featured content:
How to Choose Fence Mesh?
The Ultimate Guide to Choosing the Best Locking Wire for ...
Comprehensive Guide to Welded Wire Mesh

If you are looking for more details, kindly visit pcr plastic recycling company.

Shrink film in this type of application has been made with up to 40% PCR content.

4. What Impact on Performance Should You Expect When Using PCR?

In general, the properties of high-quality PCR resins correlate well with similar virgin grades and can have minimal impact on finished article performance, especially with the right approach to product design. For property retention, it is essential that the stream be significantly free of contamination, especially from polymers such as PP and PET. Although PP melts at the temperatures used in PE extrusion, it can affect impact performance of the final part, which is especially important in many rigid articles.

The first step in comparing the physical property performance of an article or film with PCR content to an article made with 100% virgin content is to make sure you choose the right resin for a fair comparison. It is always best to compare performance of the PCR against a virgin resin with similar MI and density. Physical property retention can be quite good provided the PCR is high quality and free of contamination.  

Since most PCR is being used as a blend component, it is also possible to consider changing the other resins in the composition to overcome the slight reduction in performance. Using higher performance virgin resins, or resins specifically formulated to compensate for PCR properties, can also result in a product that does not compromise on performance. For example, if MD tear performance is affected through the inclusion of PCR, a high-tear virgin resin can be used to compensate for the loss in performance.
 

5. How Do You Know If a PCR Resin Will Have Sufficient Stability?

Be sure to ask your supplier whether it is including additional antioxidants (AOs) in the formulation. Testing for the presence and consumption of additives is relatively easy and will determine whether there is sufficient stabilization in the PCR stream.

Through collaborations with resin suppliers and converters, recyclers are beginning to understand the value of additional stabilization. Crosslinking, which is a common result of insufficiently stabilized resin, will bring the MI down and make processing more difficult. Having additional AO added during production by your PCR supplier is ideal to protect the resin through at least its third heat history to ensure minimal degradation occurs and the MI is preserved.
 

6. Are There Tactics to Reduce Odors Commonly Associated with PCR?

Most plastic converters report that PCR has more odor than virgin plastic. Good PCR suppliers address odor early in the recycling process. It is critical to remove paper labels and cellulosic/organic contamination in the wash step to prevent particles from charring during the extrusion process.

Devolatilization is an additional step that occurs at some recyclers to drive off volatile organic compounds and can result in a noticeable reduction in odor. Deodorizing additives can also be used to improve perceived odors. Ask your supplier if any of these steps are included in their process.
 

7. How Do You Know Whether Recycled Resin Will Meet Special Criteria for Your Application?

If you have a special criterion such as absence declarations, California Prop 65, Toxins in Packaging Clearinghouse (TPCH) or food-contact statements, you must work with your supplier to address these needs. Food-contact PCR is in particularly high demand as brand owners work to achieve packaging sustainability goals.

Globally, there are differences in how the use of PCR is regulated for food-contact applications. In the U.S. and Canada, the PCR material must meet all the same legal requirements as virgin material. The Food and Drug Administration (FDA) in the U.S. and the Health Products and Food Branch (HPFB) in Canada will review the recycling process and material source(s), and then issue letters of non-objection (LNO or LONO), which are opinions on the recycling process used to produce material for food-contact applications and will include food type or use restrictions for the resulting PCR.

However, the LNO is just one criterion that must be met in order to comply with food-contact requirements. To be considered suitable for the final application from a regulatory perspective, the PCR will typically go through additional testing and obtain additional regulatory statements.

For cleanliness and gel level, ask your supplier about its cleaning steps and melt-filtration capabilities. 

The EU has a similar approach, but also requires only food-contact material be recycled for use in food-contact applications. Similarly to the FDA and HPFB, The European Food Safety Authority (EFSA) will review a recycling process to assess its suitability in producing food-contact PCR. To date, however, opinions have only been issued for rPET. It is anticipated that this may change with the recent push in the EU to develop a comprehensive strategy to include plastic in a circular economy.
 

Trash bags and can liners have been produced with upwards of 70% PCR content.

8. How Do You Determine the Maximum PCR Content You Can Use in Your Product or Package Design?

Exploring how much PCR can be incorporated into your product design is a key component of application development and should be determined on a case-by-case basis through trial evaluations and modeling. The ultimate PCR content can depend on the level of gels or impurities, physical-property retention, and aesthetics.

For cleanliness and gel level, ask your supplier about its cleaning steps and melt-filtration capabilities. For physical property retention, matching density is important, as previously noted. If this is not possible, consider what can be done to offset the resulting change in performance. With regards to aesthetics, our advice is to embrace the ugly! PCR can look very good but is not likely to look the same as virgin resin, even if the utmost care is taken in its production. Let the different aesthetic start telling the story for the consumer to understand that PCR is being used in your product design the sustainability messaging is a key component to driving growth in the circular economy!

We have seen levels of PCR in excess of 70% for some can liners and around 40% for shrink film. For more sensitive applications with stringent requirements, starting at a lower dosage such as 10% and building confidence and experience before targeting higher loadings is a good strategy. Higher loadings will be limited by required part performance and/or aesthetics. Burying the PCR in a core layer in a multi-layer structure can help overcome PCR aesthetics to some extent, and relying on high-performance blend components can offset a reduction in physical performance.
 

ABOUT THE AUTHORS: Anna Rajkovic is the circular economy market manager at Nova Chemicals, Calgary, Alta. In her role, she is responsible for the companys PCR product portfolio, and more broadly driving circularity with plastic converter customers and across the entire plastics value chain. Rajkovic also serves on the Association of Plastics Recyclers (APR) Film Technical Committee and the Alliance to End Plastic Waste Thematic Expert Group, as well as representing Nova Chemicals at IPANA, RIBCA, PDA, PPI, ASTM and CSA. Contact: 403-250-; ; novachem.com.

Tammy Rucker is v.p. of sustainable materials at Revolution, a plastics recycler based in Little Rock, Ark., where her focus is on the transition of post-consumer polyethylene from internal use to external sale. She joined the company in October of , bringing over 27 years of materials and plastics experience to the firms recycled plastic business. Rucker has worn many hats in her career, including quality-lab chemist, sales, market and product management, and marketing communications in several Fortune 500 companies: GE Plastics (now SABIC), Union Carbide (now Dow Chemical), and Avery Dennison. Contact: 312-520-; ;  revolutioncompany.com

For more pcr plastic pros and consinformation, please contact us. We will provide professional answers.

Are you interested in learning more about Substitute Shaker Screen? Contact us today to secure an expert consultation!