Rotodynamic pumps are used in most all municipal, process, power, oil and gas markets and many more. The markets and applications are too many to list, but a few are provided for perspective.
View Details
Water, Wastewater and Irrigation
Modern living depends heavily on water supply, wastewater removal, and irrigation, which all require pumps which are among the oldest machines ever used. These needs constitute a large market for pumps and are the heart of civilization.
The water that we take from the faucet gets to us by the action of pumps, which move the water through pipelines from the reservoir to our homes. Water may also come from deep wells which require vertical deep-well pumps to bring it to the surface.
Water from the sink and tub is collected and treated before disposal. Pumps are needed to move the water to the treatment plant, as shown here, and during the treatment process.
Water is also vital to the irrigation of farm products, shrubs and lawns. Pumps supply the water and pressure needed for sprinkler systems as shown or trenches to carry the water to rows of farm products.
Oil & Gas, and Process Industry
Manufacturers of liquid products that we use every day are a second major market for pumps. Making chemical products, for example, requires pumps for processing. Petroleum products, including gasoline, are derived from crude oil which must be processed at high temperatures and pressures with the aid of pumps. Operating temperature for such pumps can be over 800°F.
Electric Power Industry
Electricity which we use to light our homes and drive electric motors is produced in large electric power generating plants. Electricity is generated by large turbines using steam from high pressure boilers. Many pumps are needed in this process and make up a third large market for pumps. These powerful high pressure pumps are used to feed water at high pressure to steam boilers (Image 1).
Other pumps in power plants are necessary to remove the condensed steam from the bottom of massive steam condensers and send it to heaters which increase the water temperature. Heater drain pumps then move the water to the boiler feed pump.
Cold water is needed to cool the spent steam and turn it back to water. These pumps circulate water from the cooling tower through the condenser and back to the cooling tower where it is cooled as it splashes down through the tower.
Exhaust gas from the furnace in electric generating stations is scrubbed by water from pumps in order to remove solid particles.
If you are looking for more details, kindly visit SUNBO PUMP.
Mining and Metals Industry
Mining and the refining of metals is a fourth major market of pumps. To facilitate deep pit mining, pumps are needed to remove ground water.
After steel is produced in large ingots, it is heated and rolled into many different shapes.
High pressure water from pumps removes scale, which appears on the outside surface of the steel sheets and rods.
Other Industries
Commercial construction of buildings is a fifth key market for pumps. Buildings require pumps for applications such as fire protection. These fire pumps are engine driven in case of an electrical power failure (Image 2).
Heating and air conditioning in buildings requires pumps to circulate hot water for heating or chilled water for air conditioning (Image 3).
There are many addition pump markets and applications that are too many to list, but one can get the idea of how common pumps are in our daily life, even though we may not be thinking about them on a regular basis.
For more information on pump applications, and training on rotodynamic pump fundamentals refer to HI&#;s web based Rotodyanmic Pumps eLearning course at pumps.org.
July
Comments
Please Join Us to post.
0