9053 E Lashing wire clamp Used to secure a terminating lashing wire to the strand. Comprised of a one-piece jaw, two washers, two nuts, and a square shank stud. Bug Nut
Bugnut also stock Hubbell 9000 E Clamp
Want more information on Malleable Iron Suspension Clamp? Feel free to contact us.
Our Price: $0.57
SALE Price: $0.44
You save $0.13!
D Lashing Clamp Bug Nut 4040D Cable Lashing Clamp used in aerial construction to secure terminating lashing wire or ground wire to a strand Attaches to 1/4"(6mm) to 7/16" (16mm) Made in the USA
List Price: $1.24
Our Price: $1.16
SALE Price: $0.65
You save $0.59!
Reinforcing Strap 1/8" x 1-3/4" J7905
Reinforcing Straps support the messenger bolt at locations of heavier than normal loading stress, such as long spans and are used with cable suspension clamps. The lower hole fits over the messenger bolt and the top end is fastened to the pole with a lag screw.
Used in aerial construction as an added support for three-bolt suspension clamps.
Stock size is .125 x 1-3/8".
The distance between the Suspension Clamp and the above mounting hole is 5-7/8".
Mounting hole diameters are both 11/16".
Stamped from AISI 1018 steel.
Hot dip galvanized to meet ASTM Specification B695.
Our Price: $1.20
Reinforce Brace 1-3/8" Allied Bolt 8001
Used to support the outer end of extension bolts when installing a parallel line to existing aerial plant.
The distance between the Suspension Clamp and the above mounting hole is 8-3/4".
Stock size is 1/8" x 1-3/8".
Stamped from AISI 1018 steel.
Hot dip galvanized to meet ASTM Specification B695.
Our Price: $2.04
SALE Price: $1.59
You save $0.45!
Crossover Clamp for 1/4" Strand H-4069
H-4069 Crossover Clamp for 1/4" Strand
Our Price: $3.07
Guy Clamp One Bolt J1061
1 Bolt Guy Clamp
3⁄16"-3⁄8" Strand Range
Part Number: J1061
Bellcore Specification 8624
Rolled from carbon steel with straight parallel grooves that will not damage strand
The clamping bolts have special shoulders to prevent turning when the nuts are tightened
Constructed of high quality steel, hot-dip galvanized.
Not to be used as a suspension clamp. Use a Guy Clamp only
Our Price: $3.46
Reinforcing Strap 1/8" x 2" J7908
Reinforcing Straps support the messenger bolt at locations of heavier than normal loading stress, such as long spans and are used with cable suspension clamps. The lower hole fits over the messenger bolt and the top end is fastened to the pole with a lag screw.
Used in aerial construction as an added support for three-bolt suspension clamps.
Stock size is .125" x 2".
The distance between the Suspension Clamp and mounting hole is 5-7/8".
Hole diameters are 11/16" and 25/32".
Stamped from AISI 1018 steel.
Hot dip galvanized to meet ASTM Specification B695.
Our Price: $5.31
SALE Price: $4.13
You save $1.18!
Adsco Stainless Steel Lashing Wire Clamp LWC-304SS
Stainless Steel Adsco Lashing Wire Clamp
Scope:
This item standard is intended for use in conjunction with CSA standard CAN/CSA-C83. This item is normally mounted on messenger strand and is used to terminate cable lashing wire.
Assembly:
The lashing wire clamp is comprised of two clamp sections, two flat washers, and two hex nut assemblies on a shouldered stud. The stud should key into one clamp section at assembly to prevent stud rotation as the nuts are tightened. This keying feature is constructed to allow proper closing of the jaws. Both ends of the stud should be suitably modified after assembly to prevent loss of the nuts.
Accommodation:
The clamp will accommodate a range of messenger strand from 3/16″ to 9’16” diameter designated strand size
Our Price: $4.64
ONE Bolt Suspension Clamp - Straight J1095 11/16" Hole
Length: 2-1/2"
Mounting Hole: 11/16"
*Used with through bolts to serve as clamping member
For more carriage bolts woodinformation, please contact us. We will provide professional answers.
*Securely grips messenger strand to the pole
*A Nut and square washer are used between the clamp
and pole to provide proper spacing
*Consists of clamping members only - used with 5⁄8" through
bolt to tighten the clamp on wire as well as to the pole
*Firmly grips 1⁄4" (6.6M) to 7⁄16" (16M) diameter messenger strand
*Constructed of high quality steel, hot-dip galvanized
Our Price: $5.23
3-Bolt Suspension Clamp for Figure 8 Cable (.148-.250") Allied Bolt 7027
Used to secure figure 8 cable to telephone poles.
Each Suspension Clamp is comprised of two aluminum plates, two 1/2" carriage bolts, and two square nuts.
The plates are extruded and stamped from 6063-T6 Aluminum.
Center hole accommodates 5/8" bolts.
Figure 8 Three-Bolt Suspension Clamps are 6" long.
Carriage bolt and nuts are formed from Grade 2 Steel.
Carriage bolts and square nuts are hot dip galvanized to meet ASTM Specification A153.
Our Price: $6.96
3 Bolt Suspension Clamp for Figure 8 Cable (.109-.134") Allied Bolt 7026
Used to secure figure 8 cable to telephone poles.
Bitch clamp
Our Price: $7.11
Cable Suspension Clamp - Straight J1096 11/16" hole
MPS cable suspension clamps are used with through bolts which serve as a clamping member and are shaped to securely grip messenger wire/strand to the pole. fits 1/4 to 7/16 strand BITCH CLAMP
Our Price: $8.17
Straight Suspension Clamp 5/8" MSI H-J25088.1
MSI H-J25088.1 5/8" Straight Suspension Clamp, with Flat Keeper Plate, is used with through bolts to serve as clamping member. This Flat 3-hole clamp securely grips messenger strand to pole, it uses a nut and square washer that is used between the clamp and pole for proper spacing.
Specifications:
Our Price: $9.49
CORNER ATTACHMENT H-P294 DOUBLE THIMBLE EYE
Our Price: $10.44
Cable suspension clamp - Straight H-J7904-ALL-5087 13/16" hole 3/4" hardware
Cable suspension clamp - Straight H-J7904-ALL-5087 13/16" hole 3/4" hardware MPS cable suspension clamps are used with through bolts which serve as a clamping member and are shaped to securely grip messenger wire/strand to the pole.
Our Price: $10.74
Cable Suspension Clamp Angle J7901A 11/16 MOUNTING HOLEAngle Suspension Clamps with 1/2" track bolts and 11/16" mounting hole
Our Price: $11.11
Cable Suspension 1/4" x 3/8" Crossover Clamp MSI J7930
1/4" to 3/8" Strand. Used to clamp to messengers where the cross at right angles to prevent wear and abrasion. The clamp sections are 1 1/2in wide and 3 1/4in long. Two 1/2in diameter bolts have oval shoulders to prevent turning when tightening. J7930
Our Price: $18.26
SALE Price: $13.76
You save $4.50!
Cable Suspension Clamp Angle J7901 13/16 MOUNTING HOLEAngle Suspension Clamps with 1/2" track bolts and 13/16" mounting hole
Our Price: $13.91
Cable Suspension, Type C PA422 FIGURE 8 SERPENTINE CLAMPThis clamp incorporates serpentine grooves in the two mating clamp sections to provide superior holding strength of insulated messenger wire.
Our Price: $14.63
MESSENGER HANGER 1/4"-3/8" STRAND MSI J1070
The Maclean Senior J1070 cable messenger hanger is hot formed from 1/2" x 2" open hearth steel with a specially curved groove which permits its use on corners as well as on straight runs. Two 1/2" high carbon steel track bolts clamp the strand.
Mounting holes are 9/16" and 11/16" in diameter for a 1/2" lag screw and 5/8" through bolt.
Our Price: $28.17
SALE Price: $21.91
You save $6.26!
Messenger Clamp Medium Duty PA192A .310-.500 STRAND
.310-.500 STRAND .125-.184 GROUND WIRE RANGE
6-inch long curved clamping groove to conform to sag of span. For attaching medium size cable and triplex. Generously belled groove ends for angles. Teeth on feet resists downslotting. Smoothed area for stringing operation. Special nut retaining feature around body mounting bolt hole.
Our Price: $57.27
SALE Price: $44.54
You save $12.73!
Messenger Clamp Heavy Duty H-PA175C Strand Range .430-.630 for .750 hardware
For attaching medium to heavy duty cable on both angle and tangent construction
Two separate clamping plate bolts allow clamping action to be independent of wood shrinkage
Our Price: $79.64
Messenger Extension Bracket 12" SCB-12-5 (Current lead time of Jan 2024)
Provides a 12 inch clearance from the pole and is fastened with two 5/8 inch mounting bolts. Clamp plates are reversible to accept a wide range of messenger diameters.
Our Price: $131.70
SALE Price: $102.43
You save $29.27!
Communication Arm 3 & 2 Position Steel Under-build, 15° Angled WSO WB2751-B-HDG
HDG Communication Arm 3 & 2 - Position Steel Under-build, 15° Angled
15 degree angled Communication Arm 3 & 2 position Steel Under-build, galvanized for weather protection, and designed to allow for the addition of under-build cables. 36" & 24" in length from pole and 12" between mount holes.
All pole mounting and cable mounting holes are 11/16'' diameter.
WSO WB2751-B-HDG
Our Price: $357.26
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
We accept payments with :
Visa, MasterCard, American Express, Paypal, Diners Club, Discover and more.
For more information, please visit features of insulators.
Comments
Please Join Us to post.
0