Although numerous refractory metals can be used to manufacture wrought products, its fair to say, molybdenum is one of the most popular and, over the years, our team of experts have been tasked with creating a very diverse range of molybdenum parts, fittings and components.
The company is the world’s best Molybdenum Rod Supplier supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.
This silvery-white metal has a number of advantageous properties over other metals. For example, it has an incredibly high melting point (at °C) and it demonstrates exceptional thermal and electrical conductivity. Thanks to its strong yet ductile nature, it can be transformed into a number of different metal parts, which can be used for a wide range of industrial applications.
In the following blog, we take a look at the main types of metal parts and fittings that can be manufactured from molybdenum, highlighting their key applications and uses.
Molybdenum sheets are either square or rectangular in shape and they are designed to be as thin as possible (typically less than 0.1 inches). Their surface can be given a matte or shiny finish, dependent on the intended use, and large quantities can be manufactured with little difficulty.
This particular type of molybdenum part has the same melting point as the original element and, as such, it maintains its strength and integrity at high temperatures. Molybdenum sheets are commonly used to make lighting parts, heating elements, plasma sprayers and rocket nozzles.
A molybdenum plate is very similar to a molybdenum sheet; in fact, the only difference is size. Plates are typically smaller and thicker than sheets, with an average thickness of 0.1-3 inches. They demonstrate all the same qualities and properties of the basic element and they are often used as a blank that is, a metal part that will be used to make something more complex at a later date.
Molybdenum bars come in an array of different lengths and thicknesses and their size is often determined by their intended application. For example, whilst thick bars are commonly used in the furnace industry to construct heating elements, conductors, radiation screens and sintering trays thin bars are more commonly seen in the electrical lighting and glass-making sector.
Once again, this particular type of metal part mirrors the characteristics of the original element therefore, they have a wide range of applications and they are often used as an alloy component.
This is, without doubt, the most versatile type of molybdenum metal part currently available. Molybdenum rods can be manufactured to any length or diameter and there are a wide range of end shapes to choose from including tips, plateaus, bevels, chamfers, and grooves, to name just a few.
They are often used as a base component for more sophisticated metal parts and they can be easily adapted to create a different wrought product (e.g. rolled into a sheet or drawn into a wire).
Molybdenum wire is simply created by stretching out a molybdenum rod. It is usually 0.18-3mm in diameter and, thanks to its strength and integrity, it is frequently used in high-heat and high-pressure applications such as aerospace engineering, military technology, missile and rocket components, plasma sprayers, furnace electronics and heating elements.
Special Metals Fabrication (SMF) is one of the UKs leading stockists, suppliers, and manufacturers of wrought products. Our team have over 120 years experience in this specialist industry and, by combining our expert knowledge with state-of-the-art machinery and techniques, we are capable of producing a diverse range of molybdenum parts, fittings and components.
If you have a particular project in mind and you would like to discuss our molybdenum parts in further detail, please feel free to get in touch. Either give us a call on or send a quick message using our online form and we will help to identify the perfect metal parts for you!
Product Name: Molybdenum Bars
CAS #: -98-7
Relevant identified uses of the substance: Scientific research and development
Supplier details:
Stanford Advanced Materials
:
: (949) 407-
Address: Birtcher Dr., Lake Forest, CA U.S.A.
Classification of the substance or mixture
Classification according to Regulation (EC) No /
The substance is not classified as hazardous to health or the environment according to the CLP
regulation.
Classification according to Directive 67/548/EEC or Directive /45/EC
N/A
Information concerning particular hazards for human and environment:
No data available
Hazards not otherwise classified
No data available
Label elements
Labelling according to Regulation (EC) No /
N/A
Hazard pictograms
N/A
Signal word
N/A
Hazard statements
N/A
WHMIS classificationNot controlled
Classification system
HMIS ratings (scale 0-4)
(Hazardous Materials Identification System)
HEALTH
FIRE
REACTIVITY
0
0
0
Health (acute effects) = 0
Flammability = 0
Physical Hazard = 0
Other hazards
Results of PBT and vPvB assessment
PBT: N/A
vPvB: N/A
Substances
CAS No. / Substance Name:
-98-7 Molybdenum
Identification number(s):
EC number: 231-107-2
Description of first aid measures
General information
No special measures required.
If inhaled:
Seek medical treatment in case of complaints.
In case of skin contact:
Generally the product does not irritate the skin.
In case of eye contact:
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
If swallowed:
If symptoms persist consult doctor.
Information for doctor
Most important symptoms and effects, both acute and delayed
No data available
Indication of any immediate medical attention and special treatment needed
No data available
Extinguishing media
Suitable extinguishing agents
Special powder for metal fires. Do not use water.For safety reasons unsuitable extinguishing agents
Water
Special hazards arising from the substance or mixture
If this product is involved in a fire, the following can be released:
Molybdenum oxides
Advice for firefighters
Protective equipment:
No special measures required.
Personal precautions, protective equipment and emergency procedures
Not required.
Environmental precautions:
Do not allow product to enter drains, sewage systems, or other water courses.
Do not allow material to penetrate the ground or soil.
Methods and materials for containment and cleanup:
Pick up mechanically.
Prevention of secondary hazards:
No special measures required.
Reference to other sections
See Section 7 for information on safe handling
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
Handling
Precautions for safe handling
Keep container tightly sealed.
Store in cool, dry place in tightly closed containers.
Information about protection against explosions and fires:
No special measures required.
Conditions for safe storage, including any incompatibilities
Requirements to be met by storerooms and receptacles:
No special requirements.
Information about storage in one common storage facility:
Do not store together with acids.
Store away from oxidizing agents.
Further information about storage conditions:
Keep container tightly sealed.
Store in cool, dry conditions in well-sealed containers.
Specific end use(s)
No data available
Additional information about design of technical systems:
No further data; see section 7.
Control parametersComponents with limit values that require monitoring at the workplace: -98-7 Molybdenum
(100.0%)
PEL (USA) Long-term value: 5* 15** mg/m
3
as Mo;*soluble compds., **insol.compds.:total dust
TLV (USA) Long-term value: 10* 3** mg/m
3
as Mo; *inhalable fraction ** respirable fraction
EL (Canada) Long-term value: 3* 10** mg/m
3
as Mo; *respirable **inhalable
EV (Canada) Long-term value: 10* 3** 0.5*** mg/m
3
metal,insol.compd.:*inh;**resp;sol.compd.:***resp
Additional information: No data
Exposure controls
Personal protective equipment
Follow typical protective and hygienic practices for handling chemicals.
Maintain an ergonomically appropriate working environment.
Breathing equipment: Not required.
Recommended filter device for short term use:
Use a respirator with type N95 (USA) or PE (EN 143) cartridges as a backup to engineering controls.
Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only
use equipment tested and approved under appropriate government standards.
Protection of hands: Not required.
Material of gloves
Nitrile rubber, NBR
Penetration time of glove material (in minutes) 480
Glove thickness 0.11 mm
Eye protection: Safety glasses
Body protection: Protective work clothing.
Information on basic physical and chemical properties
Featured content:For more information, please visit Titanium Welding Rod.
Appearance:
Form: Solid in various forms
Color: Dark grey
Odor: No data available
Odor threshold: No data available.
pH: N/A
Melting point/Melting range: °C ( °F)
Boiling point/Boiling range: °C ( °F)
Sublimation temperature / start: No data available
Flammability (solid, gas): No data available.
Ignition temperature: No data available
Decomposition temperature: No data available
Autoignition: No data available.
Danger of explosion: No data available.
Explosion limits:
Lower: No data available
Upper: No data available
Vapor pressure: N/A
Density at 20 °C (68 °F): 10.22 g/cm
3
(85.286 lbs/gal)
Relative density: No data available.
Vapor density: N/A
Evaporation rate: N/A
Solubility in Water (H
2
O): No data available
Partition coefficient (n-octanol/water): No data available.Viscosity:
Dynamic: N/A
Kinematic: N/A
Other information
No data available
Reactivity
No data available
Chemical stability
Stable under recommended storage conditions.
Thermal decomposition / conditions to be avoided:
Decomposition will not occur if used and stored according to specifications.
Possibility of hazardous reactions
Reacts with strong oxidizing agents
Conditions to avoid
No data available
Incompatible materials:
Acids
Oxidizing agents
Hazardous decomposition products:
Molybdenum oxides
Information on toxicological effects
Acute toxicity:
The Registry of Toxic Effects of Chemical Substances (RTECS) contains acute toxicity data for this
substance.
LD/LC50 values that are relevant for classification: No data
Skin irritation or corrosion: May cause irritation
Eye irritation or corrosion: May cause irritation
Sensitization: No sensitizing effects known.
Germ cell mutagenicity:
The Registry of Toxic Effects of Chemical Substances (RTECS) contains mutation data for this
substance.
Carcinogenicity:
No classification data on carcinogenic properties of this material is available from the EPA, IARC,
NTP, OSHA or ACGIH.
Reproductive toxicity:
The Registry of Toxic Effects of Chemical Substances (RTECS) contains reproductive data for this
substance.
Specific target organ system toxicity - repeated exposure: No effects known.
Specific target organ system toxicity - single exposure: No effects known.
Aspiration hazard: No effects known.
Subacute to chronic toxicity:
The Registry of Toxic Effects of Chemical Substances (RTECS) contains multiple dose toxicity data for
this substance.
Additional toxicological information:
To the best of our knowledge the acute and chronic toxicity of this substance is not fully known.Carcinogenic categories
OSHA-Ca (Occupational Safety & Health Administration)
Substance is not listed.
Toxicity
Aquatic toxicity:
No data available
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Additional ecological information:
Do not allow undiluted product or large quantities to reach groundwater, water courses, or sewage
systems.
Avoid transfer into the environment.
Results of PBT and vPvB assessment
PBT: N/A
vPvB: N/A
Other adverse effects
No data available
Waste treatment methods
Recommendation
Consult official regulations to ensure proper disposal.
Uncleaned packagings:
Recommendation:
Disposal must be made according to official regulations.
UN-Number
DOT, ADN, IMDG, IATA
N/A
UN proper shipping name
DOT, ADN, IMDG, IATA
N/A
Transport hazard class(es)
DOT, ADR, ADN, IMDG, IATA
Class
N/A
Packing group
DOT, IMDG, IATA
N/A
Environmental hazards:N/A
Special precautions for user
N/A
Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code
N/A
Transport/Additional information:
DOT
Marine Pollutant (DOT):
No
Safety, health and environmental regulations/legislation specific for the substance or mixture
National regulations
All components of this product are listed in the U.S. Environmental Protection Agency Toxic
Substances Control Act Chemical substance Inventory.
All components of this product are listed on the Canadian Domestic Substances List (DSL).
SARA Section 313 (specific toxic chemical listings)
Substance is not listed.
California Proposition 65
Prop 65 - Chemicals known to cause cancer
Substance is not listed.
Prop 65 - Developmental toxicity
Substance is not listed.
Prop 65 - Developmental toxicity, female
Substance is not listed.
Prop 65 - Developmental toxicity, male
Substance is not listed.
Information about limitation of use:
For use only by technically qualified individuals.
Other regulations, limitations and prohibitive regulations
Substance of Very High Concern (SVHC) according to the REACH Regulations (EC) No. /.
Substance is not listed.
The conditions of restrictions according to Article 67 and Annex XVII of the Regulation (EC) No
/ (REACH) for the manufacturing, placing on the market and use must be observed.
Substance is not listed.
Annex XIV of the REACH Regulations (requiring Authorisation for use)
Substance is not listed.
REACH - Pre-registered substances
Substance is listed.
Chemical safety assessment:
A Chemical Safety Assessment has not been carried out.
Safety Data Sheet according to Regulation (EC) No. / (REACH). The above information is
believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The
information in this document is based on the present state of our knowledge and is applicable to the
product with regard to appropriate safety precautions. It does not represent any guarantee of the
properties of the product.
Contact us to discuss your requirements of Titanium Filler Rod. Our experienced sales team can help you identify the options that best suit your needs.
Previous: How Does 10m Titanium Rod Work?
Comments
Please Join Us to post.
0