Z Arm Mixer

Z Arm Mixer Introduction

CH series Z arm mixers are constructed from either 304 stainless steel or 316L Stainless Steel in sizes ranging from 100L to 400L. Products may be discharged via tilt discharge. This kind of paste-mixing machine is widely used in the chemical, food, sealing compound, and paint industries, among others. The Z-blade wet mixer is usually used as the front-end mixing equipment of the instant granulation production line. It is used in conjunction with the swing granulator or the rotary granulator and the vibrating fluidized bed dryer of our company. Welcome to consult Hywell Machinery.

Wantong supply professional and honest service.

Z Arm Mixer Video

Z Arm Mixers Working Principles

The mixing elements of the Z arm paste mixer are one or two Z type steel casted blades. They contra rotate inward fitted at close or specified clearance with the container to give thorough and uniform mixing. The mixing action is a combination of bulk movement, shearing, stretching, folding, dividing, and recombining as the material is pulled and squeezed against blades, saddle, and side walls. Continually new layers of material are compressed and folded over one another and are subjected to shearing forces. New surfaces are formed and the components can penetrate. The blades, which are ground and polished, successively sweep all points of the trough surface during each revolution, at the same time dividing the batch continuously across the saddle piece and thereby achieving a perfect mix.

Z Arm Mixer

Z Arm Blender

Z Blade Mixer

Z Arm Mixer Specifications

Model

Total volume (L)

Operation Volume(L)

Blending power(Kw)

Speed of mixing (r/min)

Discharge angle

Size

(mm)

Weight

(Kg)

CH-200

200

120

4

24

105

x800x

250

CH-300

300

180

5.5

24

105

x900x

320

CH-400

400

240

7.5

24

105

x950x

Contact us to discuss your requirements of Double Z Arm Blender. Our experienced sales team can help you identify the options that best suit your needs.

450

1.Hywell machinery reserves the right to the design without notice

2.All specifications of Z arm mixer are as accurate as is reasonably possible, but they are not binding.

Z Arm Blender Construction Material

Hywell Machinery are able to offer wet mixing machine with contact part to be built in SS304, SS316L, Titanium, Duplex stainless steel, etc. Electrical parts of control system of the Z arm blender can be adapted to the customer&#;s needs.

Z Blade Mixer Advantages

Hywell machinery Z Blade mixer had the following advantages over conventional solutions.

1.  Excellent homogeneity of mixing with no dead points

2.  Complete discharge and easy cleaning

3.  Drums can be built in SUS304, SUS316L, Titanium, and Duplex stainless steel.

4.  Smooth running, reliable performance, easy operation.

5.  Highly polished inner and outer surfaces of the barrel, no dead comer, easy to discharge materials, easy to clear, no cross-contamination. Confining the requirement of GMP.

Z Blade Mixer Machine Options

Hywell machinery Z Blade Mixing Machine had the following options.

1. Materials of Z blade mixer machine

 Drums can be built in SUS304, SUS316L ,Titanium, Duplex stainless steel.

2.    Control system of Z blade mixer machine

The mixer machine has more choices, such as push button or HMI+PLC.

3.    Feeding system of the Z blade mixer

 The powder blending machine can be by manual or pneumatic conveyor or vacuum feeder.

4.  Electrical component of the Z blade mixer

The Z blade mixer mainly use international brand such as ABB ,Siemens or Schneider.

Single Arm Blender

Two Blade Blender

How does the Z Arm Guttered Mixer Works 

In the process, the materials are loaded from side to side on the top of the container to characteristically 40 to 65 percent of the guttered mixer's total volumetric capability. The driving of the blades is through a serious duty drive system characteristically consisting of a motor, gearbox, coupling, and gears. The blender trough can be provided with jackets for transmission of hot or cold media to continue the obligatory temperature situation within the mixer. The release of the material from the blender container is also by leaning the paste mixers.

Z Arm Trough Mixer Application

CH Series trough mixer is used for mixing the powder state and grain state materials to achieve high uniformity in the pharmaceutical, chemical, food, light industry, electronic, mechanical, metallurgical, national defense industries, and other science and technology institutes.

Attention to Order of the Z Arm Trough Mixer

1. it needs to supply the density of materials.

3. it needs to supply the capacity per batch or capacity per hour.

5. it needs to decide which kinds of feeders that needed to load materials into the mixer.

6. it needs to decide which kinds of steel for machine-304 stainless steel or 316L stainless steel.

7. Other special requirements.

Wet Powder Mixer

Wet Powder Blender

Wet Materials Mixer

For more Double Z Arm Blending machineinformation, please contact us. We will provide professional answers.