Design considerations for pipe supports and the influence ...

I have a crawlspace with insulation fastened overhead to the bottom of the floor. The insulation is installed with craft paper up against the flooring with the fiberglass exposed. A lot of the insulation has come loose and fallen off and I need to repair what I can and replace it where it cannot be salvaged. With normal joists this would not be a problem, but I have an unusual floor support system. I have 4 x 8 beams  spaced every 4 feet with 2 x 6 tongue and groove decking over the top. The insulation is 2 foot wide fiberglass insulation placed side by side. There are staples at the edges and also in the field of the insulation, but this has torn out in places and also the fiberglass has pulled loose from the backing in places. Does anyone know of a good way to install insulation in a situation like this? I&#;m interested in function, ease of installation and also ecomomy. 

Are you interested in learning more about high temperature insulation supports? Contact us today to secure an expert consultation!